mirror of
https://review.coreboot.org/flashrom.git
synced 2025-04-27 15:12:36 +02:00
38a059d6ef
This was partly due to a design problem in the abstraction layer. There should be exactly two different functions for reading SPI chips: - memory mapped reads - SPI command reads. Each of them should be contained in a separate function, optionally taking parameters where needed. This patch solves the problems mentioned above, shortens the code and makes the code logic a lot more obvious. Since open-coding the min() function leads to errors, include it in this patch as well. Corresponding to flashrom svn r589. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Ronald G. Minnich <rminnich@gmail.com>
-------------------------------------------------------------------------------
flashrom README
-------------------------------------------------------------------------------
flashrom is a utility for reading, writing, verifying and erasing flash ROM
chips. It's often used to flash BIOS/EFI/coreboot/firmware images in-system
using a supported mainboard, but it also supports flashing of network
cards (NICs), SATA controller cards, and other external devices which can
program flash chips.
It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32, and
TSOP40 chips, which use various protocols such as LPC, FWH, parallel flash,
or SPI.
(see http://coreboot.org for details on coreboot)
Packaging
---------
To package flashrom and remove dependencies on subversion, either use
make export
or
make tarball
make export will export all flashrom files from the subversion repository at
revision BASE into a directory named $EXPORTDIR/flashrom-$VERSION-r$SVNREVISION
and will additionally modify the Makefile in that directory to contain the svn
revision of the exported tree.
make tarball will simply tar up the result of make export and gzip compress it.
The snapshot tarballs are the result of make tarball and require no further
processing.
Build Instructions
------------------
To build flashrom you need to install the following packages or ports:
Linux et al:
* pciutils
* pciutils-devel / pciutils-dev / libpci-dev
* zlib-devel / zlib1g-dev
On FreeBSD, you need the following ports:
* devel/gmake
* devel/libpci
To compile on Linux, use:
make
To compile on FreeBSD, use:
gmake
To compile on Solaris, use:
gmake LDFLAGS="-L$pathtolibpci -lpci -lz" CC="gcc -I$pathtopciheaders" \
CFLAGS=-O2
To compile on DragonFly BSD, use:
ln -s /usr/pkg/include/pciutils pci
gmake CFLAGS=-I. LDFLAGS="-L/usr/pkg/lib -lpci -lz"
To compile and run on Darwin/Mac OS X:
Install DirectIO from coresystems GmbH.
DirectIO is available at http://www.coresystems.de/en/directio.
Installation
------------
In order to install flashrom and the manpage into /usr/local, type:
sudo make install
For installation in a different directory use DESTDIR, e.g. like this:
sudo make DESTDIR=/usr install
Usage / Options
---------------
Please see the flashrom(8) manpage.
Exit status
-----------
Please see the flashrom(8) manpage.
coreboot Table and Mainboard Identification
--------------------------------------------
Please see the flashrom(8) manpage.
ROM Layout Support
------------------
Please see the flashrom(8) manpage.
Supported Flash Chips / Chipsets / Mainboards
---------------------------------------------
Please check the output of 'flashrom -L' for the list of supported
flash chips, chipsets/southbridges, mainboards, and flash programmers.
Website
-------
The official flashrom website is:
http://coreboot.org/Flashrom