There is no good reason to collect further log files of locked Intel-
based boards. Forward affected users directly to an explanation in
the wiki instead.
Corresponding to flashrom svn r1675.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Thanks to Idwer and clang for noticing these problems.
Corresponding to flashrom svn r1646.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Also, unify all outputs of "Warning:" and "Error:" to use normal
capitalization instead of mixing it with all capitals.
Corresponding to flashrom svn r1643.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>
Tested Mainboards:
OK:
- Foxconn P55MX
http://www.flashrom.org/pipermail/flashrom/2012-October/010002.html
Tested flash chips:
- Eon EN25F64 to PR (+PR)
http://paste.flashrom.org/view.php?id=1426
- Macronix MX25L1005 to PREW (+PREW)
http://www.flashrom.org/pipermail/flashrom/2012-October/010004.html
- Set SST39VF512 to PREW (+W)
http://www.flashrom.org/pipermail/flashrom/2012-September/009958.html
Tested chipsets:
- Z77 (only reading was really tested)
Miscellaneous:
- Fix ft2232_spi's parameter parsing.
- Fix nicrealtek's init (always segfaulted since r1586 oops).
- Add another T60 variant to the laptop whitelist.
- Improve message shown when image file size does not match flash chip
- Refine messages regarding the flash descriptor override strap according
to the findings by Vladislav Bykov on his P55MX.
- Fix the ID of EN25F64.
- Demote and clarify debug message in serprog_delay().
- Minor other cleanups.
Corresponding to flashrom svn r1613.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Some vendors forget to disable regions properly and set their FRAP bits
and FREG to 0. While not documented publicly this is being ignored by the
chipset(s)[1] and hence flashrom should do so too. Without this patch
flashrom prints a warning and disables writes.
The check for i (region index) excludes the descriptor region which should not
be becessary because specs suggest that the descriptor region should not
be locked, but if vendors would follow the specs this patch would not have
been necessary in the first place.
[1]: http://www.flashrom.org/pipermail/flashrom/2012-May/009303.html
Corresponding to flashrom svn r1587.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
All the driver conversion work and cleanup has been done by Stefan.
flashrom.c and cli_classic.c are a joint work of Stefan and Carl-Daniel.
Corresponding to flashrom svn r1579.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Helge Wagner's patch that added VIA VX900 chipset support made me look
closer at the datasheets which led to some concise documentation about
newer VIA chipsets: http://flashrom.org/VIA
Based on that this patch adds full support for VX800/VX820, VX855/VX875
and VX900, including SPI and LPC. VT8237S was not changed (SPI support
only) because there is no public datasheet and it is not clear how to
distinguish between LPC and SPI strapping and investigations in (NDAed)
documents have not brought up anything conclusively.
enable_flash_vt823x could probably be enhanced too due to various
ignored LPC options of the chipset.
Corresponding to flashrom svn r1578.
Signed-off-by: Helge Wagner <Helge.Wagner@ge.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Move hwaccess.h #include from flash.h to individual drivers.
libflashrom users need flash.h, but they do not care about hwaccess.h
and should not see its definitions because they may conflict with
other hardware access functions and #defines used by the libflashrom
user.
Corresponding to flashrom svn r1549.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Currently spi_aai_write() is implemented without an abstraction
mechanism for the programmer driver. This adds another function
pointer 'write_aai' to struct spi_programmer, which is set to
default_spi_write_aai (renamed spi_aai_write) for all programmers
for now.
A patch which utilises this abstraction in the dediprog driver will
follow.
Corresponding to flashrom svn r1543.
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This includes not only the notorious read-only flash descriptors and locked ME
regions, but also the more rarely used PRs (Protected Ranges).
The user can enforce write support by specifying ich_spi_force=yes in the
programmer options, but we don't tell him the exact syntax interactively. He
has to read it up in the man page.
Corresponding to flashrom svn r1494.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
All programmer types (Parallel, SPI, Opaque) now register themselves
into a generic programmer list and probing is now programmer-centric
instead of chip-centric.
Registering multiple SPI/... masters at the same time is now possible
without any problems. Handling multiple flash chips is still unchanged,
but now we have the infrastructure to deal with "dual BIOS" and "one
flash behind southbridge and one flash behind EC" sanely.
A nice side effect is that this patch kills quite a few global variables
and improves the situation for libflashrom.
Hint for developers:
struct {spi,par,opaque}_programmer now have a void *data pointer to
store any additional programmer-specific data, e.g. hardware
configuration info.
Note:
flashrom -f -c FOO -r forced_read.bin
does not work anymore. We have to find an architecturally clean way to
solve this.
Corresponding to flashrom svn r1475.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
All programmer access function prototypes except init have been made
static and moved to the respective file.
A few internal functions in flash chip drivers had chipaddr parameters
which are no longer needed.
The lines touched by flashctx changes have been adjusted to 80 columns
except in header files.
Corresponding to flashrom svn r1474.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Struct flashchip is used only for the flashchips array and for
operations which do not access hardware, e.g. printing a list of
supported flash chips.
struct flashctx (flash context) contains all data available in
struct flashchip, but it also contains runtime information like
mapping addresses. struct flashctx is expected to grow additional
members over time, a prime candidate being programmer info.
struct flashctx contains all of struct flashchip with identical
member layout, but struct flashctx has additional members at the end.
The separation between struct flashchip/flashctx shrinks the memory
requirement of the big flashchips array and allows future extension
of flashctx without having to worry about bloat.
Corresponding to flashrom svn r1473.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Push those changes forward where needed to prevent new sign
conversion warnings where possible.
Corresponding to flashrom svn r1470.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
By calling it early ichspi_lock was not set up correctly in accordance
with the corresponding register, hence ich_init_opcodes() was always
trying to programming the opcodes instead of reading them in from the
opmenu in case of a locked down configuration.
Thanks to Jonathan A. Kollasch for reporting this bug.
Corresponding to flashrom svn r1464.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
All programmers are now calling programmer registration functions and
direct manipulations of buses_supported are not needed/possible anymore.
Note: Programmers without parallel/LPC/FWH chip support should not call
register_par_programmer().
Additional fixes:
Set max_rom_decode.parallel for drkaiser.
Remove abuse of programmer_map_flash_region in it85spi.
Annotate several FIXMEs in it85spi.
Corresponding to flashrom svn r1463.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Based on the new opaque programmer framework this patch adds support
for Intel Hardware Sequencing on ICH8 and its successors.
By default (or when setting the ich_spi_mode option to auto)
the module tries to use swseq and only activates hwseq if need be:
- if important opcodes are inaccessible due to lockdown
- if more than one flash chip is attached.
The other options (swseq, hwseq) select the respective mode (if possible).
A general description of Hardware Sequencing can be found in this blog entry:
http://blogs.coreboot.org/blog/2011/06/11/gsoc-2011-flashrom-part-1/
Besides adding hwseq this patch also introduces these unrelated changes:
- Fix enable_flash_ich_dc_spi to pass ERROR_FATAL from ich_init_spi.
The whole error handling looks a bit odd to me, so this patch does
change very little. Also, it does not touch the tunnelcreek method,
which should be refactored anyway.
- Add null-pointer guards to find_opcode and find_preop
to matches the other opcode methods better:
curopcodes == NULL has some meaning and is actively used/checked in
other functions.
TODO: adding real documentation when we have a directory for it
Corresponding to flashrom svn r1461.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The type member is enough most of the time to derive the wanted
information, but
- not always (e.g. ich_set_bbar),
- only available after registration, which we want to delay till the
end of init, and
- we really want to distinguish between chipset version-grained
attributes which are not reflected by the registered programmer.
Hence this patch introduces a new static variable which is set up
early by the init functions and allows us to get rid of all "switch
(spi_programmer->type)" in ichspi.c. We reuse the enum introduced
for descriptor mode for the type of the new variable.
Previously magic numbers were passed by chipset_enable wrappers. Now
they use the enumeration items too. To get this working the enum
definition had to be moved to programmer.h.
Another noteworthy detail: previously we have checked for a valid
programmer/ich generation all over the place. I have removed those
checks and added one single check in the init method. Calling any
function of a programmer without executing the init method first, is
undefined behavior.
Corresponding to flashrom svn r1460.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This was done to ease the review. Another patch will hook up (and
explain) this code later.
Corresponding to flashrom svn r1452.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Ibex Peak SPI Programming Guide:
The PCH has a mechanism to set up to 5 address ranges from HOST access. These are
defined in PR0, PR1, PR2, PR3 and PR4 in the PCH EDS. These address ranges are NOT
unlocked by assertion of Flash descriptor Override.
Also, the datasheets mention the bit in their description of FRAP but not PR[N].
Corresponding to flashrom svn r1449.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
There is no sign of BBAR (BIOS Base Address Configuration Register)
in the public datasheet (or specification update) of the ICH8. Also,
the offset of that register has changed between ICH7 (SPIBAR + 50h)
and ICH9 (SPIBAR + A0h), so we have no clue if or where it is on
ICH8. Better don't try to touch it at all and assume/hope it is 0.
Corresponding to flashrom svn r1445.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Add headers for the columns and some decoding into human readable format.
Corresponding to flashrom svn r1444.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Based on the work of Matthias 'mazzoo' Wenzel this patch adds pretty
printing of those ICH/PCH flash descriptor sections that are
cached/mapped by the chipset (and which are therefore reachable via
FDOC/FDOD registers).
this includes the following:
- content section:
describes the image and some generic properties (number of
sections, offset of sections, PCH/ICH and MCH/PROC strap
offsets and lengths)
- component section:
identify the different SPI flash chips and their capabilities.
- region section
similarly to a partition table this describes the different regions.
the content of FLREG* is derived from this section.
- master section
defines SPI master (host, ME, GbE) access rights of the
individual regions. the content of PR* is derived from this section.
this is only a part of the data included in the descriptor. other
information can be retrieved from a complete binary dump of the
descriptor region only.
this patch also adds macros and pretty printing for "Vendor Specific
Component Capabilities" registers: there are two of them: lower and
upper. they describe the properties of the address space divided by
FPBA (which allows to use multiple flash chips or partitions with
different properties). the properties of all supported flash chips
(together with their RDIDs) are stored in the same format in table
in a descriptor section (which is used by the ME apparently). a
later patch will use the macros outside of ichspi.c which is the
reason why the prettyprinting function and the register bit macros
are not defined in ichspi.c but ich_descriptors.h (else they would
be moved in the follow-up patch).
because this patch relies on (compiler) implementation-specific
layouting of bit-fields, it checks for correct layout before taking
any action on runtime.
Corresponding to flashrom svn r1443.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This is related to the spi split patch as discussed in:
http://www.flashrom.org/pipermail/flashrom/2010-February/thread.html#2364
the old commit (r914) log notes:
"Some of the spi programmer drivers required chipdrivers.h, needs fixing later: it87spi.c
ichspi.c sb600spi.c wbsio_spi.c buspirate_spi.c ft2232spi.c bitbang_spi.c dediprog.c"
there still remain a few cases where chipdrivers.h is needed:
dediprog.c (spi_read_chunked and spi_write_chunked)
it87spi.c (due to spi_write_enable and spi_read_status_register)
wbsio_spi.c (spi_programmer registration only)
besides that, there are also non-spi files that do not need it.
also, add flash.h to chipdrivers.h because it uses some types of it
and remove flashchips.h from print.c
Corresponding to flashrom svn r1414.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
- add ich_fill_data to fill the chipset registers from an array
- add ich_read_data to copy the data from the chipset register into an array
- replace the existing code with calls to those functions
- minor cosmetic changes
Corresponding to flashrom svn r1409.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Also, indentation fixes, e.g. due to conversion to msg_*, use ARRAY_SIZE
where possible, wrap overly long line, etc.
Compile-tested. There should be no functional changes.
Corresponding to flashrom svn r1397.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
It's shorter to type, and we have less problems with the 80 column limit.
Corresponding to flashrom svn r1396.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Intel document 307013 (ICH7 datasheet) section 21.1.9 does only
define PBR[0] (at SPIBAR + 60h) to PBR[2] (SPIBAR + 68h). SPIBAR + 6Ch
and following are not defined, but we were printing them as PBR[3]
anyway. i could not find any references to PBR[3] in documentation of
other related chips (NM10, atom e6xx) either, hence kill it.
Corresponding to flashrom svn r1381.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
We print the address registers for ICH7 and VIA at init.
We should do so for ICH9 too.
Corresponding to flashrom svn r1365.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: David Hendricks <dhendrix@google.com>
Less code, documenting better what the differences are (i.e. offset of BBAR only).
Corresponding to flashrom svn r1360.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
'+' does have a quite high precedence so "calling" those macros with a
term including weaker operators in the off parameter may have unexpected
consequences.
Corresponding to flashrom svn r1359.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
- add macros for FRAP, FREG0, PR0-PR4 and BBAR
- eliminate magic numbers representing those registers and some other bits too
- remove printing out the contents of FDOC because it is useless
Corresponding to flashrom svn r1334.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Also, explain the transformation of the read/write array/count in
ich_spi_send_command better.
Corresponding to flashrom svn r1333.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
- introduce offset macros and use them to (re)define the existing mask macros
- fix masks of SSFC_COP, SSFC_DBC, SSFC_SCF (were single-bit masks erroneously)
- add comments
- rename SSFS_CDS to SSFS_FDONE (abbr. used in datasheet; not in SSFS but HSFS)
- use those for refactoring and magic number elemination.
following patch uses them for pretty printing.
Corresponding to flashrom svn r1328.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
- missing spaces in code and output
- improved documentation/naming/output
- missing line breaks in spi probing functions
Corresponding to flashrom svn r1321.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This patch combines three previously posted patches in a revised form.
one is even stolen from Stefan Reinauer (remove umlauts from man page).
Corresponding to flashrom svn r1317.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Remove the array spi_programmer, replace it by dynamic registration
instead. Also initially start with no busses supported, and switch to
the default non-SPI only for the internal programmer.
Also this patch changes the initialization for the buses_supported variable
from "everything-except-SPI" to "nothing". All programmers have to set the
bus type on their own, and this enables register_spi_programmer to just add
the SPI both for on-board SPI interfaces (where the internal programmer
already detected the other bus types), as well as for external programmers
(where we have the default "none").
Corresponding to flashrom svn r1299.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
