mirror of
https://review.coreboot.org/flashrom.git
synced 2025-04-27 23:22:37 +02:00
4740c6ff3c
Example make commandline if you want only internal programmers: make CONFIG_FT2232SPI=no CONFIG_SERPROG=no CONFIG_NIC3COM=no CONFIG_SATASII=no CONFIG_DRKAISER=no CONFIG_DUMMY=no Of course, all of the CONFIG_* symbols can be mixed and matched as needed. CONFIG_FT2232SPI is special because even if it is enabled, make will check if the headers are available and skip it otherwise. Corresponding to flashrom svn r724. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
------------------------------------------------------------------------------- flashrom README ------------------------------------------------------------------------------- flashrom is a utility for detecting, reading, writing, verifying and erasing flash chips. It is often used to flash BIOS/EFI/coreboot/firmware images in-system using a supported mainboard, but it also supports flashing of network cards (NICs), SATA controller cards, and other external devices which can program flash chips. It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32, and TSOP40 chips, which use various protocols such as LPC, FWH, parallel flash, or SPI. Packaging --------- To package flashrom and remove dependencies on subversion, either use make export or make tarball make export will export all flashrom files from the subversion repository at revision BASE into a directory named $EXPORTDIR/flashrom-$VERSION-r$SVNREVISION and will additionally modify the Makefile in that directory to contain the svn revision of the exported tree. make tarball will simply tar up the result of make export and gzip compress it. The snapshot tarballs are the result of make tarball and require no further processing. Build Instructions ------------------ To build flashrom you need to install the following packages or ports: Linux et al: * pciutils * pciutils-devel / pciutils-dev / libpci-dev * zlib-devel / zlib1g-dev (only needed if libpci is static) On FreeBSD, you need the following ports: * devel/gmake * devel/libpci To compile on Linux, use: make To compile on FreeBSD, use: gmake To compile on Nexenta, use: make To compile on Solaris, use: gmake LDFLAGS="-L$pathtolibpci" CC="gcc -I$pathtopciheaders" CFLAGS=-O2 To compile on DragonFly BSD, use: ln -s /usr/pkg/include/pciutils pci gmake CFLAGS=-I. LDFLAGS="-L/usr/pkg/lib" To compile and run on Darwin/Mac OS X: Install DirectIO from coresystems GmbH. DirectIO is available at http://www.coresystems.de/en/directio. Installation ------------ In order to install flashrom and the manpage into /usr/local, type: sudo make install For installation in a different directory use DESTDIR, e.g. like this: sudo make DESTDIR=/usr install Usage / Options --------------- Please see the flashrom(8) manpage. Exit status ----------- Please see the flashrom(8) manpage. coreboot Table and Mainboard Identification -------------------------------------------- Please see the flashrom(8) manpage. ROM Layout Support ------------------ Please see the flashrom(8) manpage. Supported Flash Chips / Chipsets / Mainboards --------------------------------------------- Please check the output of 'flashrom -L' for the list of supported flash chips, chipsets/southbridges, mainboards, and flash programmers. Contact ------- The official flashrom website is: http://www.flashrom.org/ The IRC channel is #flashrom at irc.freenode.net The Mailing list addess is flashrom@flashrom.org