mirror of
https://review.coreboot.org/flashrom.git
synced 2025-11-13 19:20:41 +01:00
b7ed1634b8d1a8e613d277a18748314dd54ed89d
The guidelines are fully specified on flashrom.org, no need to reference them. Change-Id: If5fbcf1f4dc00dd1a9c48e9fad6c99d646954bfb Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/c/flashrom/+/86547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-by: Andy Ebrahiem <ahmet.ebrahiem@9elements.com>
flashrom README
===============
flashrom is a utility for detecting, reading, writing, verifying and erasing
flash chips. It is often used to flash BIOS/EFI/coreboot/firmware images
in-system using a supported mainboard, but it also supports flashing of network
cards (NICs), SATA controller cards, and other external devices which can
program flash chips.
It supports a wide range of flash chips (most commonly found in SOIC8, DIP8,
SOIC16, WSON8, PLCC32, DIP32, TSOP32, and TSOP40 packages), which use various
protocols such as LPC, FWH, parallel flash, or SPI.
Do not use flashrom on laptops (yet)! The embedded controller (EC) present in
many laptops might interact badly with any attempts to communicate with the
flash chip and may brick your laptop.
Please make a backup of your flash chip before writing to it.
Please see the flashrom(8) manpage :doc:`classic_cli_manpage`.
Building / installing / packaging
---------------------------------
flashrom is built with **meson**. TLDR:
::
meson setup builddir
meson compile -C builddir
meson test -C builddir
meson install -C builddir
For full detailed instructions, follow the information in
:doc:`dev_guide/building_from_source`
Contact
-------
The official flashrom website is:
https://www.flashrom.org/
For available contact methods see :doc:`contact`
Description
Languages
C
90.2%
Rust
5%
Shell
2%
Makefile
1.6%
Meson
1.2%