This patch lets you read and write the EEPROM on 82580-based gigabit NIC
cards. So far it has been tested on copper NICs only, but other variants
employing this controller should work too.
It is a nice substitution for the official eeupdate tool.
Speed is quite decent: less than 4 seconds for erases or writes of 32 kB.
Corresponding to flashrom svn r1832.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Register_programmer suggests that we register a programmer. However,
that function registers a master for a given bus type, and a programmer
may support multiple masters (e.g. SPI, FWH). Rename a few other
functions to be more consistent.
Corresponding to flashrom svn r1831.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Check for NULL termination of the array, that each board has the two
main PCI ID sets defined, that coreboot vendor and model fields are either
both set or unset, and that at least either an enable function or a max
decode size is available.
Corresponding to flashrom svn r1821.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This PCI PATA controller can use 3V parallel flash up to 128 kB.
My card was identified as:
PCI 1283:8212, subsystem 1283:0001.
and labelled as:
Innovision Multimedia LTD.
EIO ATA133 RAID
(DM-8401 Ver A)
This particular card did not require setting of any GPIO signals to
enable flash writing. My card has Pm39LV512 in PLCC32 package without
socket.
Rebased by Stefan (automatic cleanup, some PCI changes, changed
enable bit handling). Committed with test state NT because the
rebased version was not tested on real hardware (yet).
Corresponding to flashrom svn r1812.
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Due to the mysterious address handling of this chip the user can specify
a base address with the offset parameter, e.g.:
flashrom -p atavia:offset=0xFFF00000
Thanks to Idwer Vollering for his iterative testing of this code, as well as to
Martijn Bastiaan who did the last tests before merging.
Corresponding to flashrom svn r1809.
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This patch adds support for the "SPI 100" SPI engine in Yangtze FCHs
(found in Kabini and Temash).
Tested reading/writing on ASRock IMB-A180 and PC Engines' APU board.
Corresponding to flashrom svn r1794.
Signed-off-by: Wei Hu <wei@aristanetworks.com>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Corresponding to flashrom svn r1789.
Inspired by and mostly based on a patch
Signed-off-by: Mark Marshall <mark.marshall@omicron.at>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
There is no reason for negative delays in our use cases:
- We don't need it (to work around any quirks).
- sleep() (POSIX) uses an unsigned argument.
- usleep() (POSIX) uses an unsigned argument.
- Sleep() (Windows) uses an unsigned argument.
Change all callees as well (without any complications).
Corresponding to flashrom svn r1782.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Convert all physmaps in dmi.c to use aligned readonly maps.
Convert all physmaps in cbtable.c to use unaligned readonly maps.
Make physunmap() a generic architecture-independent wrapper.
Add physunmap_unaligned() to complement physmap*_unaligned().
Corresponding to flashrom svn r1765.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
- Combine enable_flash_ich_4e() and enable_flash_ich_dc() to
enable_flash_ich_fwh().
- Remove unjustified (chipset) name parameters from various
enable_flash_ich* functions.
- Make Poulsbo and Tunnel Creek use generic enables by refining existing
functions to work with them, including everything in ichspi.c.
- Refactor enable_flash_ich_fwh_decode() to be called unconditionally for
all chipsets.
- Add support for Intel Atom Centerton (S12x0).
- Recombine ICH2/3/4/5 to CHIPSET_ICH2345 because we treat them equally
anyway.
- Move spibar handling out of ich_init_spi() into enable_flash_ich_spi()
- Various small cleanups.
Corresponding to flashrom svn r1761.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Follow the style used from ICH7 onwards to pass ich_generation
parameter to lower-level functions on older ICH chipsets too.
Corresponding to flashrom svn r1747.
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
The only call path where exit was reached was from physmap functions.
Callers of physmap() et al. which were not prepared to handle
ERROR_PTR return values have been adjusted.
physmap_try_ro() has been renamed to physmap_ro() and physmap_common()
slightly refactored due to the now removed *FAIL parameters.
Corresponding to flashrom svn r1745.
Signed-off-by: Niklas Söderlund <niso@kth.se>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Previously we had to rely on dmidecode to decode the DMI/SMBIOS table.
This patch integrates a DMI decoder into flashrom. The old behavior of calling
dmidecode can be brought back by using CONFIG_INTERNAL_DMI=no.
Significant portions of this patch were taken from dmidecode, hence add its
authors to the copyright notice (dmidecode is also GPL2+). We do a few things
differently though. First of all we do more bounds checking to prevent accessing
unmapped memory. We do not support disovery via EFI (yet), but memory
scanning only. We handle the chassis-type lock bit correctly which dmidecode
did not for a long while.
The API to the rest of flashrom remains stable, but the output changes slightly.
To share as much code as possible (which actually is not much), i have added
dmi_fill methods that get called in dmi_init. They are reponsible to fill the
dmi_strings array and setting the is_laptop variable. After it is called, dmi_init
prints all dmi_strings. Previously the strings were printed in the order they were
discovered, followed by the chassis-type, which is now output earlier (in dmi_fill).
Because DJGPP does not support strnlen a simple implementation was added
for it.
This is still only available on x86; actually it is not even compiled in for other
architectures at all anymore.
Corresponding to flashrom svn r1735.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Maciej Pijanka <maciej.pijanka@gmail.com>
Tested-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
- Add return values to sp_flush_stream(), sp_pass_writen(),
sp_execute_opbuf(), sp_execute_opbuf_noflush(),
sp_check_opbuf_usage(), sp_do_read_n().
- Use those return values to propagate errors instead of exiting.
In some places this has to wait for core API changes (error handling for
chip_readb, chip_readn, chip_write) hence comments are added instead.
Corresponding to flashrom svn r1719.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This allows to easily reconfigure a serial port as needed in
the Bus Pirate speedup patch.
Corresponding to flashrom svn r1717.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Similarly to the previous PCI self-clean up patch this one allows to get rid
of a huge number of programmer shutdown functions and makes introducing
bugs harder. It adds a new function rphysmap() that takes care of unmapping
at shutdown. Callers are changed where it makes sense.
Corresponding to flashrom svn r1714.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Detect and temporarily disable the IMC while accessing the flash.
Disable writes on default, but allow the user to enforce it.
Corresponding to flashrom svn r1704.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: David Hendricks <dhendrix@google.com>
Unsigned long is not the right type for manipulating pointer values.
Since C99 there are suitable unsigned and signed types available, namely
uintptr_t and intptr_t respectively.
Use them in functions assigned to programmers' map_flash_region fields and
their callers where applicable.
This patch also changes the display width of all associated address values in
physmap.c to 16/8 hex characters depending on the actual size by
introducing a macro PRIxPTR_WIDTH and exploiting printf's * field width
specifier.
Corresponding to flashrom svn r1701.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Handle long sleeps on non-Windows correctly.
Corresponding to flashrom svn r1667.
Signed-off-by: Maksim Kuleshov <mmcx@mail.ru>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
It seems useful to have a generic and platform-independent method to
read and write to a serial port without blocking. This is the write part.
This allows to get rid of the explicit temporary disabling of blocking I/O in
serprog's sp_synchronize().
Corresponding to flashrom svn r1662.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
It seems useful to have a generic and platform-independent method to
read and write to a serial port without blocking. This is the read part.
It stores the current blocking properties before disabling blocking and
restores them after reading. The timeout is implemented as previously
by retrying every millisecond until the timeout is reached or enough
characters are available.
Corresponding to flashrom svn r1661.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Adds support for the Altera USB-Blaster programming dongle in Active
Serial (AS) mode. Tested on both original product and a clone dongle.
Corresponding to flashrom svn r1658.
Signed-off-by: James Laird <jhl@mafipulation.org>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
New IDs taken from Intel's patches for the Linux kernel.
Also, refine original Lynx Point naming etc.
Corresponding to flashrom svn r1656.
Based on the chromiumos patch
Change-Id: I303a05baa80e4449e70d20adf78ebc7128b88d8e
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Pcidev_init() now returns struct pci_device * instead of a BAR stored in
PCI config space. This allows for real error checking instead of having
exit(1) everywhere in pcidev.c.
Thanks to Niklas Söderlund for coming up with the original error
handling patch which was slightly modified and folded into this patch.
Move the declaration of struct pci_device in programmer.h before the
first user.
Corresponding to flashrom svn r1644.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Previously the internal programmer used its own code to initialize pcilib.
This patch extracts the common code from the internal programmer and
pcidev_init() into pcidev_init_common().
This fixes the non-existent PCI cleanup of the internal programmer and adds
an additional safety by checking for an already existing PCI context.
We got a nice shutdown function registration infrastructure, but did not use it
very wisely. Instead we added shutdown functions to a myriad of programmers
unnecessarily. In this patch we get rid of those that do only call pci_cleanup(pacc)
by adding a shutdown function the pcidev.c itself that gets registered by
pcidev_init().
Corresponding to flashrom svn r1642.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This makes some stuff const (partially to get a more convenient
libflashrom interface).
Corresponding to flashrom svn r1639.
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Once upon a time usbdev_status was created for the ft2232
programmer. Its IDs are semantically different to pcidev_status
because they indicate USB instead of PCI IDs, but apart from that
both data structures are equal. This change makes life easier for
everything involved in handling and printing the status of devices
that is noted in those structures by combining them into dev_entry.
It is still possible to distinguish between PCI and USB devices
indirectly by using the struct programmer's type field.
Also, add a programmer column to the PCI and USB devices lists.
Corresponding to flashrom svn r1632.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
To be able to get rid of lots of #ifdefs and centralize programmer-specific
data more...
- introduce two new fields to struct programmer_entry, namely
enum type (OTHER, USB, PCI) and union devs (pcidev_status, usbdev_status
or char *note).
- use those fields to generate device listings in print.c and print_wiki.c.
Bonus: add printing of USB devices to print_wiki.c and count supported PCI
and USB devices.
Corresponding to flashrom svn r1631.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
And remove the completely unused vendor field.
Corresponding to flashrom svn r1630.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
In r1577 we removed the discrimination of coreboot IDs and user-specified
mainboards. The problem is that the board enable code required to find
a board enable if either of these model strings were set. Therefore boards
running coreboot that do not need a board enable failed to execute flashrom
since then. This patch fixes this by handling coreboot IDs and user-supplied
IDs differently again.
Corresponding to flashrom svn r1605.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>
This was broken since r1557 when we got rid of some exit calls, but returned
-1 instead which is not a valid HANDLE value.
Corresponding to flashrom svn r1591.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>
All the driver conversion work and cleanup has been done by Stefan.
flashrom.c and cli_classic.c are a joint work of Stefan and Carl-Daniel.
Corresponding to flashrom svn r1579.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Helge Wagner's patch that added VIA VX900 chipset support made me look
closer at the datasheets which led to some concise documentation about
newer VIA chipsets: http://flashrom.org/VIA
Based on that this patch adds full support for VX800/VX820, VX855/VX875
and VX900, including SPI and LPC. VT8237S was not changed (SPI support
only) because there is no public datasheet and it is not clear how to
distinguish between LPC and SPI strapping and investigations in (NDAed)
documents have not brought up anything conclusively.
enable_flash_vt823x could probably be enhanced too due to various
ignored LPC options of the chipset.
Corresponding to flashrom svn r1578.
Signed-off-by: Helge Wagner <Helge.Wagner@ge.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This patch gets rid of some global variables and makes lots of bits along
the code path that control the board enable execution more generic and
clearer. From now on flashrom aborts on a few more occasions that should be
safer for the user. For example it aborts if the enable function for the
specified mainboard (enable) can not be found.
Parts of the board_match_cbname refactoring were done by Carl-Daniel.
Corresponding to flashrom svn r1577.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
And remove the unused force parameter.
Corresponding to flashrom svn r1569.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Move Mac OS X IOKit/DirectHW availability checks in the Makefile from
compiler check to pciutils check.
Print the compiler error messages for feature detection.
Add DOS libpci in the Makefile includes only if a PCI-based programmer
was requested.
Restrict mmap usage in ich_descriptors_tool to Unix style systems.
Build ich_descriptors_tool with the correct .exe extension on
DOS/Windows.
Build ich_descriptors_tool by default on x86. (Patch by Stefan Tauner)
Print the Windows version instead of "unknown machine" on Windows.
Don't #define our own __DARWIN__, use the standard OS X detection
method.
Update the README.
Add more generated files to svn:ignore
Corresponding to flashrom svn r1567.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Previously boards in the wiki were tagged either as working or as known
bad. But we added support to various boards via board enables that were
then never tested because the owners have not reported back. This can
now be tagged with NT and is shown appropriately.
Also, the underlying data structure indicating state was converted from
macros to an enum while preserving original integer values and is used
for programmers and chipsets too.
Corresponding to flashrom svn r1555.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Get_io_perms() is renamed to rget_io_perms() and automatically registers
a function to release I/O permissions on shutdown.
Actually release I/O permissions on Solaris and iopl()-supporting
operating systems like Linux.
This patch fixes quite a few programmers which forgot to release I/O
permissions on shutdown, and it simplifies the shutdown and error
handling code for all others.
Do not call exit(1) if I/O permissions are denied and return an error
instead. This part of the patch was written by Niklas Söderlund.
Corresponding to flashrom svn r1551.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Niklas Söderlund <niso@kth.se>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Move hwaccess.h #include from flash.h to individual drivers.
libflashrom users need flash.h, but they do not care about hwaccess.h
and should not see its definitions because they may conflict with
other hardware access functions and #defines used by the libflashrom
user.
Corresponding to flashrom svn r1549.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Restructure PCI device detection code.
Rename pcidev_validate to pcidev_readbar.
Note: Slight changes in behaviour are possible, especially on dual/quad
chip NICs which appear as more than one PCI device. Found devices are no
longer printed at _pinfo level, but rather at _pdbg level.
Corresponding to flashrom svn r1548.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Currently spi_aai_write() is implemented without an abstraction
mechanism for the programmer driver. This adds another function
pointer 'write_aai' to struct spi_programmer, which is set to
default_spi_write_aai (renamed spi_aai_write) for all programmers
for now.
A patch which utilises this abstraction in the dediprog driver will
follow.
Corresponding to flashrom svn r1543.
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Add ITE IT8707F/IT8710F detection.
Note that we autodetect those chips, but we don't handle their flash
translation features automatically yet.
Corresponding to flashrom svn r1533.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
This adds the pony_spi driver which supports the SI_Prog adapter, which
is commonly used for SPI chips with PonyProg 2000, and a custom adapter
called "SERBANG" which differs in the logic of two pins.
Corresponding to flashrom svn r1525.
Signed-off-by: Virgil-Adrian Teaca <darkstarlinux@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
The ITE IT87 SPI driver uses a trick to speed up reading and writing:
If a flash chip is 512 kByte or less, the flash chip can be completely
mapped in memory and both read and write accesses are faster that way.
The current IT87 SPI code did use the parallel programmer interface for
memory mapped reads and writes, but that's the wrong abstraction. It has
been fixed to use mmio_read*/mmio_write* for that purpose.
The Winbond W83627 SPI driver uses the same trick in its read path for
all supported chip sizes. Fix it the same way.
Switch internal_chip_readn to use mmio_readn as proper abstraction.
Kudos to Michael Karcher for spotting the bugs.
Tested-by: Johan Svensson <flashrom.js@crypt.se>
Corresponding to flashrom svn r1511.
Reported-by: Johan Svensson <flashrom.js@crypt.se>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Note: The internal programmer will abort during processor check. This is
intentional.
The other hardware drivers (except those using port I/O) should work.
Corresponding to flashrom svn r1492.
Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: David Hendricks <dhendrix@google.com>
Tested-by: Timo Juhani Lindfors <timo.lindfors@iki.fi>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
NOTE:
The --list-supported-wiki output changed to use -p internal:mainboard=
instead of -m
The --list-supported output changed the heading of the mainboard list
from
Vendor Board Status Required option
to
Vendor Board Status Required value for
-p internal:mainboard=
Fix lb_vendor_dev_from_string() not to write to the supplied string.
Corresponding to flashrom svn r1483.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This patch adds an external utility that shares most of the existing descriptor
decoding source code. Additionally to what is available via FDOC/FDOD this
allows to access:
- the softstraps which are used to configure the chipset by flash content
without the need for BIOS routines. on ICH8 it is possible to read those
with FDOC/FDOC too, but this was removed in later chipsets.
- the ME VSCC (Vendor Specific Component Capabilities) table. simply put,
this is an SPI chip database used to figure out the flash's capabilities.
- the MAC address stored in the GbE image.
Intel thinks this information should be confidential for ICH9 and up, but
references some tidbits in their public documentation.
This patch includes the human-readable information for ICH8, Ibex Peak
(5 series) and Cougar Point (6 series); the latter two were obtained from
leaked "SPI Flash Programming Guides" found by google. Data regarding ICH9
and 10 is unknown to us yet. It can probably found in:
"Intel® ICH7, ICH8, ICH9 and ICH10 — SPI Family Flash Programming Guide"
Information regarding the upcoming Panther Point chipset is also not included.
Corresponding to flashrom svn r1480.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Matthias Wenzel <bios@mazzoo.de>
