REed by roxfan and Michael Karcher, patch by Stefan Tauner.
Corresponding to flashrom svn r1653.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Also, unify all outputs of "Warning:" and "Error:" to use normal
capitalization instead of mixing it with all capitals.
Corresponding to flashrom svn r1643.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>
IDs are from the host bridge and LPC controller. The enable function
was reverse engineered by roxfan, thanks!
User mezzo vanished without reporting any test results.
Corresponding to flashrom svn r1622.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested Mainboards:
OK:
- Foxconn P55MX
http://www.flashrom.org/pipermail/flashrom/2012-October/010002.html
Tested flash chips:
- Eon EN25F64 to PR (+PR)
http://paste.flashrom.org/view.php?id=1426
- Macronix MX25L1005 to PREW (+PREW)
http://www.flashrom.org/pipermail/flashrom/2012-October/010004.html
- Set SST39VF512 to PREW (+W)
http://www.flashrom.org/pipermail/flashrom/2012-September/009958.html
Tested chipsets:
- Z77 (only reading was really tested)
Miscellaneous:
- Fix ft2232_spi's parameter parsing.
- Fix nicrealtek's init (always segfaulted since r1586 oops).
- Add another T60 variant to the laptop whitelist.
- Improve message shown when image file size does not match flash chip
- Refine messages regarding the flash descriptor override strap according
to the findings by Vladislav Bykov on his P55MX.
- Fix the ID of EN25F64.
- Demote and clarify debug message in serprog_delay().
- Minor other cleanups.
Corresponding to flashrom svn r1613.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This should get rid of the need to specify the laptop force
parameter on T60 and X60 series Thinkpads (including T60s and X60s)
that are using one of the Intel 94x northbridges and are known to have
no interfering EC. Please note that although the EC is no problem, flashrom
is not able to access the entire flash chip with the vendor BIOS, see the
coreboot wiki for details: http://www.coreboot.org/Lenovo_x60x
Corresponding to flashrom svn r1606.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
In r1577 we removed the discrimination of coreboot IDs and user-specified
mainboards. The problem is that the board enable code required to find
a board enable if either of these model strings were set. Therefore boards
running coreboot that do not need a board enable failed to execute flashrom
since then. This patch fixes this by handling coreboot IDs and user-supplied
IDs differently again.
Corresponding to flashrom svn r1605.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>
It's the same as for the Neo2.
Thanks to roxfan and twice11 who did the RE!
Corresponding to flashrom svn r1597.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Jud Porter
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Based on http://patchwork.coreboot.org/patch/2881/ but with
the right pin (i.e. 16) according to Joshua Roys.
Corresponding to flashrom svn r1596.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
We made a first step into this direction in r1405, but failed to
notice that there was already an extended patch by Jonathan which
was refined to become this one.
Allows the removal of board_shuttle_fn25 (which was also intended to be
used on the ASUS A8N-SLI Deluxe, but this was never tested).
Corresponding to flashrom svn r1593.
A previous iteration was tested on CK804 and
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net>
which was then
Acked-by: Stefan Reinauer <stepan@coreboot.org>
Rebasing, refining and making errors non-fatal is
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This patch just fixes a limited number of bits not conforming to c99 by using
- __asm__ instead of just asm
- {0} instead of {} for struct initialization
- h_addr_list[0] instead of h_addr to access the host address in
struct hostent
- #include <strings.h> where needed (for ffs and strcasecmp)
Based on a previous patch by Carl-Daniel.
Corresponding to flashrom svn r1585.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Corresponding to flashrom svn r1581.
Based on http://patchwork.coreboot.org/patch/2983/
Signed-off-by: Tadas Slotkus <devtadas@gmail.com>
PCI IDs are generic therefore requiring manual activation.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Helge Wagner's patch that added VIA VX900 chipset support made me look
closer at the datasheets which led to some concise documentation about
newer VIA chipsets: http://flashrom.org/VIA
Based on that this patch adds full support for VX800/VX820, VX855/VX875
and VX900, including SPI and LPC. VT8237S was not changed (SPI support
only) because there is no public datasheet and it is not clear how to
distinguish between LPC and SPI strapping and investigations in (NDAed)
documents have not brought up anything conclusively.
enable_flash_vt823x could probably be enhanced too due to various
ignored LPC options of the chipset.
Corresponding to flashrom svn r1578.
Signed-off-by: Helge Wagner <Helge.Wagner@ge.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This patch gets rid of some global variables and makes lots of bits along
the code path that control the board enable execution more generic and
clearer. From now on flashrom aborts on a few more occasions that should be
safer for the user. For example it aborts if the enable function for the
specified mainboard (enable) can not be found.
Parts of the board_match_cbname refactoring were done by Carl-Daniel.
Corresponding to flashrom svn r1577.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Abit KN8 Ultra, agami/island aruma and IWILL DK8-HTX had no secondary
PCI IDs which complicates things.
Some google foo discovered some appropriate IDs, but they are all untested.
Let's pretend this breaks nothing.
Corresponding to flashrom svn r1568.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
The PCI IDs are generic VIA IDs. Only Biostar IDs are those of the LOM, but
that would not be a good choice for ID. So autodetection has been disabled
and the user needs to specify -p internal:mainboard=biostar:m7viq instead.
Corresponding to flashrom svn r1566.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Move hwaccess.h #include from flash.h to individual drivers.
libflashrom users need flash.h, but they do not care about hwaccess.h
and should not see its definitions because they may conflict with
other hardware access functions and #defines used by the libflashrom
user.
Corresponding to flashrom svn r1549.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Handle PCI Device ID 0x0360 for MCP55 ISA bridge GPIO as well.
Tested-by: Stefan A. Scholtz
Corresponding to flashrom svn r1547.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Add ITE IT8707F/IT8710F detection.
Note that we autodetect those chips, but we don't handle their flash
translation features automatically yet.
Corresponding to flashrom svn r1533.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Not hooked up to the superio detection framework yet.
Corresponding to flashrom svn r1529.
Signed-off-by: David Borg <borg.db@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
These are used in ASUS RS120-E5/PA2 servers.
GPIO pin discovered, patch prepared and
Tested-by: Geoffrey McRae
Corresponding to flashrom svn r1526.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Primary IDs SMBus controller, secondary IDs MCH.
The reverse engineering was done by Michael Karcher.
Андрей Тимираев <dark_prof@mail.ru> reported the problem, but did not
reply (yet) to our propsed fix.
Corresponding to flashrom svn r1516.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
The vendor enable does some other funky stuff with MTRRs/MSRs, SMIs,
cache and legacy ISA address forward twiddling. I would only use
this patch to read and verify the existing contents, just to be safe.
The PCI IDs of the onboard devices do contain no subsystem IDs at all.
Probing and reading was
Tested-by: Ville Skyttä <ville.skytta@iki.fi>
See http://www.flashrom.org/pipermail/flashrom/2010-October/005256.html
Corresponding to flashrom svn r1501.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This patch adds a generic phase 2 board enable that does nothing but set
is_laptop to 0 to circumvent an erroneous laptop detection due to ambigous
DMI chassis information.
Corresponding to flashrom svn r1487.
Signed-off-by: Ingo Feldschmid <ifel@msc-ge.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Typical AWARD enable structure with an ICH GPIO board enable.
This board seems also to be known as D2544-B1.
Success report:
http://www.flashrom.org/pipermail/flashrom/2012-January/008590.html
Corresponding to flashrom svn r1486.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Oliver Rath <rath@mglug.de>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
NOTE:
The --list-supported-wiki output changed to use -p internal:mainboard=
instead of -m
The --list-supported output changed the heading of the mainboard list
from
Vendor Board Status Required option
to
Vendor Board Status Required value for
-p internal:mainboard=
Fix lb_vendor_dev_from_string() not to write to the supplied string.
Corresponding to flashrom svn r1483.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
The reverse engineering was done by Joshua. The actual patch was
fabricated by Paul with some polishing by Stefan.
Success log:
http://www.flashrom.org/pipermail/flashrom/2011-November/008257.html
Corresponding to flashrom svn r1468.
Signed-off-by: Joshua Roys <roysjosh at gmail.com>
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
The reverse engineering was done by Joshua. The actual patch was
fabricated by Stefan.
Request:
http://www.flashrom.org/pipermail/flashrom/2011-November/008241.html
Success report:
http://paste.flashrom.org/view.php?id=914
Corresponding to flashrom svn r1467.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Mugendai <mugendai42@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This looks suspiciously like intel_ich_gpio_set.
Based on that, add board enables for the ASUS P5N-D and P5N-E SLI.
This was tested by Guillaume Poirier-Morency on a P5N-D:
http://www.flashrom.org/pipermail/flashrom/2011-August/007706.html
Corresponding to flashrom svn r1466.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Small changes were also contributed and
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
All programmers are now calling programmer registration functions and
direct manipulations of buses_supported are not needed/possible anymore.
Note: Programmers without parallel/LPC/FWH chip support should not call
register_par_programmer().
Additional fixes:
Set max_rom_decode.parallel for drkaiser.
Remove abuse of programmer_map_flash_region in it85spi.
Annotate several FIXMEs in it85spi.
Corresponding to flashrom svn r1463.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Changes related to P5GD1 variants:
- Reorder "P5GD1 Pro" in print.c and include a DMI patter to its board enable
- Add an untested "P5GD1(-VM)" board enable and add an entry to print.c
- Add P5GD1-VM/S variant as reported by "Limer"
Changes related to P5GD(2/C) variants:
- Fix the name of "P5GDC-V Deluxe" board enable and add a DMI pattern and
print.c entry. NB: there is no "P5GDC-V" board.
- Add a generic match for P5GD(2/C)* boards with a not tested tag.
This are the potential targets for this according to the asus ftp:
ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/
Unsupported variants of the P5GD2:
P5GD2, P5GD2 Deluxe, P5GD2 Pro, P5GD2-X
(P5GD2 Premium is already tested)
(there seems to be also a P5GD2-TVM/GB/SI in the wild, which is not known to
asus :)
Unsupported variants of the P5GDC:
P5GDC Pro, P5GDC-MX
(P5GDC Deluxe and P5GDC-V Deluxe are already tested)
References:
P5GD1 PRO (dmi "P5GD1 PRO")
smbus: 0x8086, 0x266a, 0x1043, 0x80a6; audio: 0x8086, 0x2668, 0x1043, *0x814e*
http://www.coreboot.org/pipermail/flashrom/2010-August/004539.html
P5GD1 (dmi "P5GD1")
The non-pro version seems to match the pro pci pattern, but could be
distinguished by the SATA ID of 1043:2604 vs. 1043:2601:
https://launchpadlibrarian.net/62167576/Lspci.txt
or a DMI pattern of course.
P5GD1-VM (dmi "P5GD1-VM")
This does also match the current PCI IDs.
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/465379
- P5GD2 Premium (dmi "P5GD2-Premium")
smbus: 0x8086, 0x266a, 0x1043, 0x80a6; audio: 0x8086, 0x2668, 0x1043, 0x813d
http://www.flashrom.org/pipermail/flashrom/2010-August/004555.html
- P5GDC-V Deluxe (dmi "P5GDC-V")
smbus: 0x8086, 0x266a, 0x1043, 0x80a6; audio: 0x8086, 0x2668, 0x1043, 0x813d
http://www.flashrom.org/pipermail/flashrom/2010-September/004939.html
- P5GDC Deluxe (dmi "P5GDC")
smbus: 0x8086, 0x266a, 0x1043, 0x80a6; audio: 0x8086, 0x2668, 0x1043, 0x813d
http://www.flashrom.org/pipermail/flashrom/2010-September/004684.html
- P5GDC Pro, P5GDC-MX, P5GD2-X, P5GD2 Pro, P5GD2
no useful logs found
- P5GD2-Deluxe (dmi "P5GD2-Deluxe")
smbus: 0x8086, 0x266a, 0x1043, 0x80a6; audio: 0x8086, 0x2668, 0x1043, 0x813d
https://bugs.launchpad.net/ubuntu/+source/foomatic-filters/+bug/572514
- P5GD2-TVM/GB/SI (dmi "P5GD2-TVM/GB/SI")
smbus: 0x8086, 0x266a, 0x1043, 0x266a; audio: 0x8086, 0x2668, 0x1043, *0x81a7*
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/462500
Corresponding to flashrom svn r1457.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
and due to the tremendous interest... ;)
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
I disassembled the write enable and the write disable functions from
the Award BIOS image and reconstructed C code to understand for
myself what happens. For details see:
http://www.flashrom.org/pipermail/flashrom/2011-October/008033.html
I compared the download pages of both, abit AV8 and abit AV8-3rd Eye,
and the BIOS downloads are the same. So it's save to assume that this
board enable works on both versions. Tested on AV8.
Corresponding to flashrom svn r1455.
Signed-off-by: Christoph Grenz <christophg+cb@grenz-bonn.de>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Based on the REing of Michael Karcher and a good guess of Idwer Vollering.
Corresponding to flashrom svn r1419.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Leon Zhang <leoncamel at gmail.com>
http://www.coreboot.org/pipermail/flashrom/2010-August/004500.html
Tested-by: medhi <nefkongo@hotmail.com>
http://paste.flashrom.org/view.php?id=779
Acked-by: Idwer Vollering <vidwer@gmail.com>
- Mixing uninitialized and initialized local variables leads to
confusion.
- ft2232_spi error cases should have gotten some error handling, and
that's the reason the curly braces were there.
- Fixing typos/wording in some places would have been nice given that
those places were touched anyway.
Corresponding to flashrom svn r1413.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
There are numerous other variants of the P5LD2 which vary wildly not only in
PCB layout but also in northbridges used, number of PCI, PCI-E and DIMM slots
etc. This one is for the plain P5LD2 without any suffixes.
This patch is essentially a rebased version of Joshua's patch, which was never
tested (user did not reply). I have added additional PCI IDs and the DMI pattern
and also changed the status to NT. An entry in the print.c table was also added.
http://www.flashrom.org/pipermail/flashrom/2010-October/005080.html
Corresponding to flashrom svn r1410.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
It is based on Joshua Roys' RE.
http://www.flashrom.org/pipermail/flashrom/2011-August/007504.html
Corresponding to flashrom svn r1408.
Tested-by: Márton Miklós
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
- retag it as OK (tested by Jonathan Kollasch when he wrote it)
http://patchwork.coreboot.org/patch/2106/
- add a line with identical pci ids but a different DMI pattern, so that EP-9NPA7I
is also matched. combining multiple boards in one line is problematic due to
print.c's detection of board enables - so dont bother for now.
http://www.flashrom.org/pipermail/flashrom/2011-June/006878.html
See previous commit for additional information.
Corresponding to flashrom svn r1406.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Also, indentation fixes, e.g. due to conversion to msg_*, use ARRAY_SIZE
where possible, wrap overly long line, etc.
Compile-tested. There should be no functional changes.
Corresponding to flashrom svn r1397.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
It's shorter to type, and we have less problems with the 80 column limit.
Corresponding to flashrom svn r1396.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
