To be safe, the onboard video of the nView edition of this board has
been included in the match. If other NF-M2 editions have the same board
enable, the match should be broadened
lspci/superiotool
http://www.coreboot.org/pipermail/flashrom/2010-April/002909.html
No success report, thus committed as untested.
Corresponding to flashrom svn r1109.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Non-working board reported by idlogin / Putlinuxonit <putlinuxonit@gmail.com>
lspci/superiotool:
http://www.coreboot.org/pipermail/flashrom/2010-May/003330.html
No success report, so committed as untested.
Corresponding to flashrom svn r1106.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Non-working board reported by: Anders Jenbo <anders@jenbo.dk>
lspci/superiotool:
http://www.coreboot.org/pipermail/flashrom/2010-June/003346.html
no success report, so committed as untested.
Corresponding to flashrom svn r1105.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
No response from reporter - committed as "untested".
Corresponding to flashrom svn r1101.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Change the nicnatsemi address mask to use MA0-MA16 and set the maximum
decode size to 128KB.
Corresponding to flashrom svn r1095.
Signed-off-by: Andrew Morgan <ziltro@ziltro.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Fix a bug where 4 GB of spaces would be printed per line if a vendor
name was longer than 10 chars.
This patch is needed to commit MoselVitelic chip support.
Corresponding to flashrom svn r1090.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
r1063 had several issues: The PCI IDs for this board are copy/pasted from
the A8N and plain wrong for this board and the board enable is marked as
tested although it isn't. Finally the board description was slightly
wrong and the URL missing.
Corresponding to flashrom svn r1071.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Constify variables where possible.
Initialize programmer-related variables explicitly in programmer_init to
allow running programmer_init from a clean state after
programmer_shutdown.
Prohibit registering programmer shutdown functions before init or after
shutdown.
Kill some dead code.
Rename global variables with namespace-polluting names.
Use a previously unused locking helper function in sst49lfxxxc.c.
This is needed for libflashrom.
Effects on the binary size of flashrom are minimal (300 bytes
shrinkage), but the data section shrinks by 4384 bytes, and that's a
good thing if flashrom is operating in constrained envionments.
Corresponding to flashrom svn r1068.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Reporter/owner of that board: oscar <oshikore@gmail.com>
http://www.coreboot.org/pipermail/flashrom/2010-April/002910.html
Corresponding to flashrom svn r1040.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The logic was incorrect in one place which had && instead of ||. Move
the board info #define B to the file where it is used.
Corresponding to flashrom svn r1035.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
The required "-m" options were not in the wiki output due to a mistake
that I think I introduced recently.
Corresponding to flashrom svn r1027.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Also modifies nvidia_mcp_gpio_set to cope with multiple MCP55 chips on
the same board, like on the Tyan S2915-E.
Corresponding to flashrom svn r1025.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Adis Salcin <crow@linux.org.ba>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Also, merge the tables in the output, i.e. there's only one table which
contains both known-good and known-bad/untested boards.
Corresponding to flashrom svn r1024.
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
CONFIG_FT2232SPI (makefile config option)
FT2232_SPI_SUPPORT (#define)
ft2232spi (programmer name)
ft2232_spi.c (programmer file)
Use CONFIG_* with underscores for makefile config options and #defines
and kill the useless _SUPPORT idiom.
Use lowercase names with underscores for programmer names and programmer
files.
With this, you can run "grep -i ft2232_spi" and find everything related
to the ft2232_spi driver. Same applies to all other programmers.
Corresponding to flashrom svn r1023.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Unistd.h was only used to get a definition of NULL in all files. Add our
own NULL #define and remove unistd.h from flash.h
stdio.h has no place in flash.h, it should be included only in files
which really need it.
Add #include statements in individual .c files where needed.
Replace a few printf with msg_* to eliminate the need for stdio.h.
Corresponding to flashrom svn r1021.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
- x86/x86_64 (little endian)
- PowerPC (big endian)
- MIPS (big+little endian)
No changes to programmer specific code. This means any drivers with MMIO
access will _not_ suddenly start working on big endian systems, but with
this patch everything is in place to fix them.
Compilation should work on all architectures listed above for all
drivers except nic3com and nicrealtek which require PCI Port IO which is
x86-only for now.
To compile without nic3com and nicrealtek, run
make distclean
make CONFIG_NIC3COM=no CONFIG_NICREALTEK=no
Thanks to Misha Manulis for testing early versions of this patch on
PowerPC (big endian) with the satasii programmer.
Thanks to Segher Boessenkool for design review and for helping out with
compiler tricks and pointing out that we need eieio on PowerPC.
Thanks to Vladimir Serbinenko for compile testing on MIPS (little
endian) and PowerPC (big endian) and for runtime testing on MIPS (little
endian).
Thanks to David Daney for compile testing on MIPS (big endian).
Thanks to Uwe Hermann for compile and runtime testing on x86_64.
DO NOT RUN flashrom ON NON-X86 AFTER APPLYING THIS PATCH!
This patch only provides the infrastructure, but does not convert any
drivers, so flashrom will compile, but it won't do the right thing on
non-x86 platforms.
Corresponding to flashrom svn r1013.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Misha Manulis <misha@manulis.com>
Acked-by: Vladimir 'phcoder/φ-coder' Serbinenko <phcoder@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
- Add missing entries for 'flashrom -L' output and wiki output.
- Add missing entries in the manpage.
- nicrealtek.c: Coding style fixes and cosmetics.
Corresponding to flashrom svn r1011.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Change the command line interface to make file names positional.
Add more sanity checks to the command line parser.
Corresponding to flashrom svn r998.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Move boards which had an IT87* SPI board enable from the board enable
list to the OK list.
Mark the Gigabyte GA-MA78GPM-DS2H as OK.
Change the it87spi forced port parameter to it87spiport=...
Fix incorrect indentation in the man page.
Tested by Ward Vandewege on both variants of the Gigabyte GA-M57SLI-S4
http://www.flashrom.org/pipermail/flashrom/2010-March/002712.html
Tested by 李彥學 (Ian-Xue Li) on the Gigabyte GA-MA78GPM-DS2H
http://www.flashrom.org/pipermail/flashrom/2010-March/002723.html
Corresponding to flashrom svn r983.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ward Vandewege <ward@gnu.org>
See http://www.coreboot.org/pipermail/flashrom/2010-March/002451.html
Thanks to Paweł Stawicki for reporting!
Corresponding to flashrom svn r980.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
See http://www.coreboot.org/pipermail/flashrom/2010-March/002501.html
Thanks to Konstantin Matuschek for reporting.
Corresponding to flashrom svn r977.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Abit VT6X4 / W29C020C: See
http://www.coreboot.org/pipermail/flashrom/2010-March/002730.html
Fixes typo in comment and marks board-enable as tested (the flashrom
running on that machine was patched with the board enable that got
in later).
Asus A7V133 / Atmel AT29C010A: See
http://www.coreboot.org/pipermail/flashrom/2010-March/002729.html
Adding "erase" to tested as there is only one erase function.
Corresponding to flashrom svn r975.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This board has a supported chipset and a supported bios, but it's
connected indirectly through IT8716 and not recognized.
Corresponding to flashrom svn r935.
Signed-off-by: Raúl Soriano <GatoLoko@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
I have an ASUS A7V8X-X, the BIOS programming requires a write-enable. It
has an IT8712F, just like the A7V600-X.
Corresponding to flashrom svn r929.
Signed-off-by: Russ Dill <Russ.Dill@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Only done for VT8237R (possibly needed for VT8237 too), VT8235 does
not need this (even if the original bios does so: Asus A7V8X-MX SE,
MSI KT4V were verified).
This then opens a floodgate of cleanups in the board enables.
* EPIA SP board enable vanishes, taking EPIA CN match with it.
* Asus A7V8X-MX/Tyan S2498 board enable then equals
w836xx_memw_enable_2e
* AOpen vKM400Am-S board enable then equals it8705_rom_write_enable
* Epia M board enable becomes via_vt823x_gpio15_raise
* Epia N board enable becomes via_vt823x_gpio9_raise
* Asus M2V-MX board enable becomes via_vt823x_gpio5_raise
* vt823x_gpio_set becomes via_vt823x_gpio_set, and now detects ISA
bridge itself, in concordance with intel ich and nvidia mcp gpio.
Corresponding to flashrom svn r815.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Make various pieces of code conditional on support for internal
programming. Code shared between PCI device programmers and onboard
programming is now conditional as well.
It is now possible to build only with dummy support:
make CONFIG_INTERNAL=no CONFIG_NIC3COM=no CONFIG_SATASII=no
CONFIG_DRKAISER=no CONFIG_SERPROG=no CONFIG_FT2232SPI=no
This allows building for a specific use case only, and it also
facilitates porting to a new architecture because it is possible to
focus on highlevel code only.
Note: Either internal or dummy programmer needs to be compiled in due to
the current behaviour of always picking a default programmer if -p is
not specified. Picking an arbitrary external programmer as default
wouldn't make sense.
Build and runtime tested in all 1024 possible build combinations. The
only failures are by design as mentioned above.
Corresponding to flashrom svn r797.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>
To prepare for libflashrom I wanted to make the main loop more readable and more correct and factor out stuff which can be useful in libflashrom.
- Factor out printing of supported devices to print.c.
- Adjust name of wiki printing function to fit the pattern.
- Abort if the user specified --verify and --noverify at the same time.
- Check for extra parameters which don't fit commandline syntax.
Corresponding to flashrom svn r766.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Mark SiS 735 as supported.
Remove "SiS" from the model number to avoid printing it twice.
Reported by Adrian Glaubitz.
Corresponding to flashrom svn r760.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Reported by martin f krafft <madduck@madduck.net>
Mark "Asus K8V SE Deluxe" as supported. Reported by Luke Dashjr
<luke_coreboot@dashjr.org>
Corresponding to flashrom svn r758.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
- MSI MS-6153 (reported by Uwe Hermann <uwe@hermann-uwe.de>)
Tested by me on hardware. The board decodes max. 256 KB.
- MSI MS-6156 (reported by Uwe Hermann <uwe@hermann-uwe.de>)
Tested by me on hardware. The board decodes max. 256 KB.
Also, fix Dell PowerEdge 1850 name and add some more board URLs.
Corresponding to flashrom svn r749.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
This is useful for libflashrom (you don't need wiki output in a coreboot
payload).
Wiki output is now disabled by default. If you want to enable it, run
make CONFIG_PRINT_WIKI=yes
Corresponding to flashrom svn r725.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Example make commandline if you want only internal programmers:
make CONFIG_FT2232SPI=no CONFIG_SERPROG=no CONFIG_NIC3COM=no
CONFIG_SATASII=no CONFIG_DRKAISER=no CONFIG_DUMMY=no
Of course, all of the CONFIG_* symbols can be mixed and matched as
needed. CONFIG_FT2232SPI is special because even if it is enabled, make
will check if the headers are available and skip it otherwise.
Corresponding to flashrom svn r724.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
This is a followup to r705.
Corresponding to flashrom svn r707.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Luc Verhaegen <libv@skynet.be>
Update bad board list and remove boards where either the chipset is
not supported (not a board issue) or where we have no report in the
archives.
Corresponding to flashrom svn r703.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Mark the following boards as OK (no board-enable needed):
- Tyan S2466 (reported by Oliver Niesner <oli@servebbs.net>)
http://www.flashrom.org/pipermail/flashrom/2009-August/000211.html
Mark the following boards as non-working for now:
- ASRock K7VT4A+ (reported by Udu Ogah <putlinuxonit@gmail.com>)
Chipset detect, but no chip.
- ASUS M2N68 (reported by Udu Ogah <putlinuxonit@gmail.com>)
Chipset detect, but no chip.
- ASUS A7V600-X (reported by Udu Ogah <putlinuxonit@gmail.com>)
Chipset and chip detected, writes don't work. Board-enable required.
Also, add some missing board URLs and fix incorrect board names.
Corresponding to flashrom svn r695.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
