mirror of
https://review.coreboot.org/flashrom.git
synced 2025-11-15 12:10:42 +01:00
00e02a61840d0f230d25f8988d2f30100ae1388d
CH347 SPI interface supports up to 60M. For example, to set a 30M spi rate, use -p ch347_spi:spispeed=30M. Change-Id: If2be48929db540a6598ac0b60b37e64597156db7 Signed-off-by: ZhiYuanNJ Liu <871238103@qq.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/82776 Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
flashrom README
===============
flashrom is a utility for detecting, reading, writing, verifying and erasing
flash chips. It is often used to flash BIOS/EFI/coreboot/firmware images
in-system using a supported mainboard, but it also supports flashing of network
cards (NICs), SATA controller cards, and other external devices which can
program flash chips.
It supports a wide range of flash chips (most commonly found in SOIC8, DIP8,
SOIC16, WSON8, PLCC32, DIP32, TSOP32, and TSOP40 packages), which use various
protocols such as LPC, FWH, parallel flash, or SPI.
Do not use flashrom on laptops (yet)! The embedded controller (EC) present in
many laptops might interact badly with any attempts to communicate with the
flash chip and may brick your laptop.
Please make a backup of your flash chip before writing to it.
Please see the flashrom(8) manpage :doc:`classic_cli_manpage`.
Building / installing / packaging
---------------------------------
flashrom is built with **meson**. TLDR:
::
meson setup builddir
meson compile -C builddir
meson test -C builddir
meson install -C builddir
For full detailed instructions, follow the information in
:doc:`dev_guide/building_from_source`
Contact
-------
The official flashrom website is:
https://www.flashrom.org/
For available contact methods see :doc:`contact`
Description
Languages
C
90.2%
Rust
5%
Shell
2%
Makefile
1.6%
Meson
1.2%