1
0
mirror of https://review.coreboot.org/flashrom.git synced 2025-04-27 07:02:34 +02:00
Funkeleinhorn 2a5d2920d8 serprog: Add SPI Mode and CS Mode commands
This commit adds two new commands to the serprog protocol which allow
more fine grained control over the SPI bus. This enables more
applications over serprog like e.g. flashing AVR microcontrollers.
This can be tried with my forks of pico-serprog:

https://github.com/funkeleinhorn/pico-serprog/tree/spimode

and avrdude:

https://github.com/funkeleinhorn/avrgirl/tree/serprog-programmer

I announced this change in flashrom and flashprog IRC channels and got
overall positive feedback in the flashprog channel. The same changes
will be sent to flashprog to prevent diverging specs.

Change-Id: Idb5a9a3710fede322def5191d68b7fba0e135292
Signed-off-by: Funkeleinhorn <git@funkeleinhorn.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/81428
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-02 02:51:19 +00:00
2023-03-01 09:40:52 +00:00
2007-09-08 14:36:01 +00:00
2023-03-28 00:36:36 +00:00
2024-03-08 12:30:13 +00:00
2023-10-25 10:03:31 +00:00
2023-07-18 01:17:04 +00:00
2023-04-24 13:30:12 +00:00
2019-07-31 08:26:59 +00:00
2023-05-07 08:36:39 +00:00

flashrom README
===============

flashrom is a utility for detecting, reading, writing, verifying and erasing
flash chips. It is often used to flash BIOS/EFI/coreboot/firmware images
in-system using a supported mainboard, but it also supports flashing of network
cards (NICs), SATA controller cards, and other external devices which can
program flash chips.

It supports a wide range of flash chips (most commonly found in SOIC8, DIP8,
SOIC16, WSON8, PLCC32, DIP32, TSOP32, and TSOP40 packages), which use various
protocols such as LPC, FWH, parallel flash, or SPI.

Do not use flashrom on laptops (yet)! The embedded controller (EC) present in
many laptops might interact badly with any attempts to communicate with the
flash chip and may brick your laptop.

Please make a backup of your flash chip before writing to it.

Please see the flashrom(8) manpage :doc:`classic_cli_manpage`.


Building / installing / packaging
---------------------------------

flashrom supports building with **make** and **meson**.

TLDR, building with meson
"""""""""""""""""""""""""

::

    meson setup builddir
    meson compile -C builddir
    meson test -C builddir
    meson install -C builddir

For full detailed instructions, follow the information in
:doc:`dev_guide/building_from_source`

TLDR, building with make
""""""""""""""""""""""""

::

	make
	make install

For full detailed instructions, follow the information in
:doc:`dev_guide/building_with_make`

Contact
-------

The official flashrom website is:

  https://www.flashrom.org/

For available contact methods see :doc:`contact`
Description
No description provided
Readme 75 MiB
Languages
C 90.2%
Rust 5%
Shell 2%
Makefile 1.6%
Meson 1.2%