1
0
mirror of https://review.coreboot.org/flashrom.git synced 2025-04-30 08:23:42 +02:00
Luc Verhaegen 90e8e61318 Add NForce2 chipset enable
While the other chipset enables for nvidia could potentially also work,
this one, by not touching other bits, seems like the safest solution.

Uwe tested this on his Asus A7N8X Deluxe, so hopefully the A7N8X-E
(reporter unknown) is now no longer an issue.

Corresponding to flashrom svn r548.

Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
2009-05-26 09:48:28 +00:00
2009-05-26 09:48:28 +00:00
2009-05-26 09:48:28 +00:00
2007-09-08 14:36:01 +00:00
2009-05-25 23:26:50 +00:00
2009-05-17 15:49:24 +00:00
2009-05-25 23:26:50 +00:00
2009-05-17 22:57:34 +00:00
2009-05-22 13:18:38 +00:00
2009-05-17 15:49:24 +00:00
2009-05-25 23:26:50 +00:00

-------------------------------------------------------------------------------
flashrom README
-------------------------------------------------------------------------------

flashrom is a utility for reading, writing, verifying and erasing flash ROM
chips. It's often used to flash BIOS/EFI/coreboot/firmware images in-system
using a supported mainboard, but it also supports flashing of network
cards (NICs), SATA controller cards, and other external devices which can
program flash chips.

It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32, and
TSOP40 chips, which use various protocols such as LPC, FWH, parallel flash,
or SPI.

(see http://coreboot.org for details on coreboot)


Build Requirements
------------------

To build flashrom you need to install the following packages or ports:

Linux et al:

 * pciutils
 * pciutils-devel / pciutils-dev / libpci-dev
 * zlib-devel / zlib1g-dev

On FreeBSD, you need the following ports:

 * devel/gmake
 * devel/libpci

To compile on Linux, use:

 make

To compile on FreeBSD, use:

 gmake

To compile on Solaris, use:

 gmake LDFLAGS="-L$pathtolibpci -lpci -lz" CC="gcc -I$pathtopciheaders" \
       CFLAGS=-O2

To compile on DragonFly BSD, use:

 ln -s /usr/pkg/include/pciutils pci
 gmake CFLAGS=-I. LDFLAGS="-L/usr/pkg/lib -lpci -lz"

To compile and run on Darwin/Mac OS X:

 Install DirectIO from coresystems GmbH.
 DirectIO is available at http://www.coresystems.de/en/directio.


Usage / Options
---------------

Please see the flashrom(8) manpage.


Exit status
-----------

Please see the flashrom(8) manpage.


coreboot Table and Mainboard Identification
--------------------------------------------

Please see the flashrom(8) manpage.


ROM Layout Support
------------------

Please see the flashrom(8) manpage.


Supported Flash Chips / Chipsets / Mainboards
---------------------------------------------

Please check the output of 'flashrom -L' for the list of supported
flash chips, chipsets/southbridges, mainboards, and flash programmers.

Website
-------

The official flashrom website is:

  http://coreboot.org/Flashrom

Description
No description provided
Readme 75 MiB
Languages
C 90.2%
Rust 5%
Shell 2%
Makefile 1.6%
Meson 1.2%