As a consecuence, some of the files that used to include flash.h no
longer need to do so. For this reason, flash.h includes are also deleted
in this commit.
Change-Id: I794a71536a3b85fde39f83c802fa0f5dd8d428e0
Signed-off-by: Antonio Vázquez Blanco <antoniovazquezblanco@gmail.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/85539
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
Reviewed-by: Peter Marheine <pmarheine@chromium.org>
Reviewed-by: David Reguera Garcia (Dreg) <regueragarciadavid@gmail.com>
Reviewed-by: Matti Finder <matti.finder@gmail.com>
Some boards need to configure the programmer in specific ways.
For example, a programmer such as internal may need to be configured
either as laptop or not type and as such the board enable needs the
ability to feed state back into the programmer configuration. Plumb
this though by creating a board_cfg structure that can be packed.
Change-Id: I7058a693e714a6966a842ae97cc8da7296e63e5e
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/71623
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
A NULL func pointer is necessary and sufficient for the
condition `NULL func pointer => true' as to not need this
boilerplate as it implies default behaviour of a supported
opcode within the `check_block_eraser()` match supported loop.
Ran;
```
$ find . -name '*.[c,h]' -exec sed -i '/.probe_opcode = default_spi_probe_opcode,/d' '{}' \;
```
Change-Id: Id502c5d2596ad1db52faf05723083620e4c52c12
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/70264
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Thomas Heijligen <src@posteo.de>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
A NULL func pointer is necessary and sufficient for the
condition `NULL func pointer => default_spi_send_multicommand' as to not
need this explicit specification of 'default'.
Therefore drop the explicit need to specify the
'default_spi_send_multicommand' callback function pointer in the
spi_master struct. This is a reasonable default for every other driver
in the tree with only a few exceptions.
This simplifies the code and driver development.
Change-Id: I6cc24bf982da3d5251d391eb397db43dd10280e8
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/67481
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Thomas Heijligen <src@posteo.de>
The non-custom driver programmer delay implementation
'internal_delay()' is unrelated specifically to the
'internal' programmer. The delay implementation is
simply a platform-agnostic host delay implementation.
Therefore, rename to simply default_delay().
Change-Id: I5e04adf16812ceb1480992c92bca25ed80f8897a
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/68855
Reviewed-by: Alexander Goncharov <chat@joursoir.net>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Replace `programmer_delay(NULL, [..])` calls with direct
`internal_delay([..])` dispatches explicitly. Custom driver
delays remain hooked as well as core flashrom logic. The
NULL base case of 'programmer_delay()' then becomes a condition
to validate for layering violations or invalid flash contexts.
Change-Id: I1da230804d5e8f47a6e281feb66f381514dc6861
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/68434
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Modify the `programmer_delay` function signature to allow passing
the flashrom context. Programmers that depend on internal delay
should provide NULL as a context. The use of this function parameter
will be introduced in CB:67393.
TOPIC=programmer_handle_global
TEST=builds
Change-Id: Ibb0bce26ce2052853ee52158d7ba742967a9e229
Signed-off-by: Alexander Goncharov <chat@joursoir.net>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/66373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Move (un)map_flash_region function pointers from programmer_entry to
par_master, spi_master, and opaque_master. This enables programmers to
specify a different mapper per bus, which is needed for the internal
programmer. Mapping is closely tied to the way the memory is accessed
using the other functions in the bus master structs.
Validate that FWH/LPC programmers provide specialized mapping in
register_par_master(); this is needed for chips with
FEATURE_REGISTERMAP, which only exist on FWH or LPC buses.
programmer.c: Update comment in fallback_map(), NULL return is the
desired behavior.
Test: Read firmware on SB600 Promontory mainboard (requires physmap)
Test: Read firmware externally with ft2232_spi
Test: Read firmware on ICH hwseq, verify physmap still occurs
Change-Id: I9c3df6ae260bcdb246dfb0cd8e043919609b014b
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Co-Authored-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/67695
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a field, probe_opcode, to struct spi_master which points to a
function returning a bool by checking if a given command is supported by
the programmer in use. This is used for getting a whitelist of commands
supported by the programmer, as some programmers like ichspi don't
support all opcodes.
Most programmers use the default function, which just returns true.
ICHSPI and dummyflasher use their specialized function.
Change-Id: I6852ef92788221f471a859c879f8aff42558d36d
Signed-off-by: Aarya Chaumal <aarya.chaumal@gmail.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/65183
Reviewed-by: Thomas Heijligen <src@posteo.de>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use `<tab>.key<tab>*= <value>,`
TEST: `make VERSION=0 MAN_DATE=0` returns the same flashrom binary
before and after the patch
Change-Id: I1c45ea9804ca09e040d7ac98255042f58b01f8ef
Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/65363
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
The mmio_le/be_read/writex functions are used for raw memory access.
Bundle them with the physmap functions.
Change-Id: I313062b078e89630c703038866ac93c651f0f49a
Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/61160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Allow port I/O related code to be compiled independent from memory
mapping functionality. This enables for a better selection of needed
hardware access types.
Change-Id: I372b4a409f036da766c42bc406b596bc41b0f75a
Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/60110
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The build system handles the decision when to build a file.
Extra compile guards for the source files are not necessary.
Change-Id: I76a76e05c7a7dd27637325ab1e9d8946fd5f9076
Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.de>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/57797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This allows spi masters to register shutdown function in spi_master
struct, which means there is no need to call register_shutdown in init
function, since this call is now a part of register_spi_master.
As a consequence of using new API, two things are happening here:
1) No resource leakage anymore in case register_shutdown() would fail,
2) Fixed propagation of register_spi_master() return values.
Basic testing: when I comment out free(data) in linux_spi_shutdown, test
fails with error
../linux_spi.c:235: note: block 0x55a4db276510 allocated here
ERROR: linux_spi_init_and_shutdown_test_success leaked 1 block(s)
Means, shutdown function is invoked.
BUG=b:185191942
TEST= 1) builds and ninja test including CB:56911
2) On ARMv7 device
flashrom -p linux_spi -V
-> using linux_spi, chip found
3) On x86_64 AMD device
flashrom -p internal -V
-> this is actually using sb600spi, chip found
Change-Id: Ib60300f9ddb295a255d5ef3f8da0e07064207140
Signed-off-by: Anastasia Klimchuk <aklm@chromium.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/56103
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
This patch prepares spi masters to use new API which allows to
register shutdown function in spi_master struct. See also later
patch in this chain, where spi masters are converted to new API.
BUG=b:185191942
TEST=builds and ninja test
Comparing flashrom binary before and after the patch,
make clean && make CONFIG_EVERYTHING=yes VERSION=none
binary is the same
Change-Id: I50716686552b4ddcc6089d5afadb19ef59d9f9b4
Signed-off-by: Anastasia Klimchuk <aklm@chromium.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/56101
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Spelling out the struct type name hurts readability and introduces
opportunities for bugs to happen when the pointer variable type is
changed but the corresponding sizeof is (are) not.
TEST=`make CONFIG_EVERYTHING=yes CONFIG_JLINK_SPI=no VERSION=none -j`
with and without this patch; the flashrom executable does not change.
Change-Id: Icc0b60ca6ef9f5ece6ed2a0e03600bb6ccd7dcc6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/55266
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Pass pointers to dynamically allocated data to register_spi_master().
This way we can avoid some mutable globals.
Change-Id: Id7821f1db3284b7b5b3d0abfd878b979c53870a1
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/54067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
It was impossible to register a const struct spi_master that would
point to dynamically allocated `data`. Fix that so that we won't
have to create more mutable globals.
Change-Id: I0c753b3db050fb87d4bbe2301a7ead854f28456f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/54066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Make use of the reneterent framework by moving singleton static
state out of the global life-time and into a per-spi_master basis.
This allows for the wbsio_spi master to be reneterent and its internal
state's life-time to be correctly handled by Flashrom's core dispatch
logic.
BUG=none
TEST=builds
Change-Id: Ic97fa41daf26f27b68ced11ddc2a4da91d18f68e
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/47854
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reshuffle file with no semantic changes, this avoids unnecessary
prototypes for static member functions as to pave the way for further
cleanups as well as an easier to parse implementation.
BUG=none
TEST=builds
Change-Id: Iae9426b6a8ba6a824f7d7e9aaf9f8174b044d04c
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/47853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
The ChromiumOS flashrom fork has since const'ify flashctx
in a few places. This aligns the function signatures to
match with downstream to ease forward porting patches
out of downstream back into mainline flashrom.
This patch is minimum viable alignment and so feedback is
welcome.
Change-Id: Iff6dbda13cb0d941481c0d204b9c30895630fbd1
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/40324
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Mostly by changing to `unsigned` types where applicable, sometimes
`signed` types, and casting as a last resort.
Change-Id: I08895543ffb7a48058bcf91ef6500ca113f2d305
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/30409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
Not needed anymore. Drop it fast before it encourages anyone to
violate layers again!
Change-Id: I8eda93b429e3ebaef79e22aba76be62987e496f4
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/33651
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Register_programmer suggests that we register a programmer. However,
that function registers a master for a given bus type, and a programmer
may support multiple masters (e.g. SPI, FWH). Rename a few other
functions to be more consistent.
Corresponding to flashrom svn r1831.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Move hwaccess.h #include from flash.h to individual drivers.
libflashrom users need flash.h, but they do not care about hwaccess.h
and should not see its definitions because they may conflict with
other hardware access functions and #defines used by the libflashrom
user.
Corresponding to flashrom svn r1549.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Currently spi_aai_write() is implemented without an abstraction
mechanism for the programmer driver. This adds another function
pointer 'write_aai' to struct spi_programmer, which is set to
default_spi_write_aai (renamed spi_aai_write) for all programmers
for now.
A patch which utilises this abstraction in the dediprog driver will
follow.
Corresponding to flashrom svn r1543.
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The ITE IT87 SPI driver uses a trick to speed up reading and writing:
If a flash chip is 512 kByte or less, the flash chip can be completely
mapped in memory and both read and write accesses are faster that way.
The current IT87 SPI code did use the parallel programmer interface for
memory mapped reads and writes, but that's the wrong abstraction. It has
been fixed to use mmio_read*/mmio_write* for that purpose.
The Winbond W83627 SPI driver uses the same trick in its read path for
all supported chip sizes. Fix it the same way.
Switch internal_chip_readn to use mmio_readn as proper abstraction.
Kudos to Michael Karcher for spotting the bugs.
Tested-by: Johan Svensson <flashrom.js@crypt.se>
Corresponding to flashrom svn r1511.
Reported-by: Johan Svensson <flashrom.js@crypt.se>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
All programmer access function prototypes except init have been made
static and moved to the respective file.
A few internal functions in flash chip drivers had chipaddr parameters
which are no longer needed.
The lines touched by flashctx changes have been adjusted to 80 columns
except in header files.
Corresponding to flashrom svn r1474.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Struct flashchip is used only for the flashchips array and for
operations which do not access hardware, e.g. printing a list of
supported flash chips.
struct flashctx (flash context) contains all data available in
struct flashchip, but it also contains runtime information like
mapping addresses. struct flashctx is expected to grow additional
members over time, a prime candidate being programmer info.
struct flashctx contains all of struct flashchip with identical
member layout, but struct flashctx has additional members at the end.
The separation between struct flashchip/flashctx shrinks the memory
requirement of the big flashchips array and allows future extension
of flashctx without having to worry about bloat.
Corresponding to flashrom svn r1473.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Push those changes forward where needed to prevent new sign
conversion warnings where possible.
Corresponding to flashrom svn r1470.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
All programmers are now calling programmer registration functions and
direct manipulations of buses_supported are not needed/possible anymore.
Note: Programmers without parallel/LPC/FWH chip support should not call
register_par_programmer().
Additional fixes:
Set max_rom_decode.parallel for drkaiser.
Remove abuse of programmer_map_flash_region in it85spi.
Annotate several FIXMEs in it85spi.
Corresponding to flashrom svn r1463.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
- probe_timing was changed to unsigned although we use negative values
for special cases
- some code was not changed along hence did no longer compile:
* dediprog's read and write functions
* linux_spi's read and write functions
- it introduced a number of new sign conversion warnings
(http://paste.flashrom.org/view.php?id=832)
To be safe this patch reverts all changes made in r1448, a corrected
patch will follow later.
Thanks to idwer for pointing out the problem first!
Corresponding to flashrom svn r1450.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This patch combines three previously posted patches in a revised form.
one is even stolen from Stefan Reinauer (remove umlauts from man page).
Corresponding to flashrom svn r1317.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Remove the array spi_programmer, replace it by dynamic registration
instead. Also initially start with no busses supported, and switch to
the default non-SPI only for the internal programmer.
Also this patch changes the initialization for the buses_supported variable
from "everything-except-SPI" to "nothing". All programmers have to set the
bus type on their own, and this enables register_spi_programmer to just add
the SPI both for on-board SPI interfaces (where the internal programmer
already detected the other bus types), as well as for external programmers
(where we have the default "none").
Corresponding to flashrom svn r1299.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Programmer specific functions are of absolutely no interest to any file
except those dealing with programmer specific actions (special SPI
commands and the generic core).
The new header structure is as follows (and yes, improvements are
possible):
flashchips.h flash chip IDs
chipdrivers.h chip-specific read/write/... functions
flash.h common header for all stuff that doesn't fit elsewhere
hwaccess.h hardware access functions
programmer.h programmer specific functions
coreboot_tables.h header from coreboot, internal programmer only
spi.h SPI command definitions
Corresponding to flashrom svn r1112.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Use this instead of the open-coding variant that only aborts after it is too late.
Corresponding to flashrom svn r1081.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
However, wrap the write functions in a compat layer to allow converting
the rest of flashrom later. Tested on Intel NM10 by David Hendricks.
Corresponding to flashrom svn r1080.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Every board-enable function is passed a 'const char *name' (board name)
which is totally useless as the board name was already printed by flashrom
at that point. Also, 95% or so of the board-enables don't use the
parameter anyway. So, drop it.
Corresponding to flashrom svn r1037.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Unistd.h was only used to get a definition of NULL in all files. Add our
own NULL #define and remove unistd.h from flash.h
stdio.h has no place in flash.h, it should be included only in files
which really need it.
Add #include statements in individual .c files where needed.
Replace a few printf with msg_* to eliminate the need for stdio.h.
Corresponding to flashrom svn r1021.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
- x86/x86_64 (little endian)
- PowerPC (big endian)
- MIPS (big+little endian)
No changes to programmer specific code. This means any drivers with MMIO
access will _not_ suddenly start working on big endian systems, but with
this patch everything is in place to fix them.
Compilation should work on all architectures listed above for all
drivers except nic3com and nicrealtek which require PCI Port IO which is
x86-only for now.
To compile without nic3com and nicrealtek, run
make distclean
make CONFIG_NIC3COM=no CONFIG_NICREALTEK=no
Thanks to Misha Manulis for testing early versions of this patch on
PowerPC (big endian) with the satasii programmer.
Thanks to Segher Boessenkool for design review and for helping out with
compiler tricks and pointing out that we need eieio on PowerPC.
Thanks to Vladimir Serbinenko for compile testing on MIPS (little
endian) and PowerPC (big endian) and for runtime testing on MIPS (little
endian).
Thanks to David Daney for compile testing on MIPS (big endian).
Thanks to Uwe Hermann for compile and runtime testing on x86_64.
DO NOT RUN flashrom ON NON-X86 AFTER APPLYING THIS PATCH!
This patch only provides the infrastructure, but does not convert any
drivers, so flashrom will compile, but it won't do the right thing on
non-x86 platforms.
Corresponding to flashrom svn r1013.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Misha Manulis <misha@manulis.com>
Acked-by: Vladimir 'phcoder/φ-coder' Serbinenko <phcoder@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Corresponding to flashrom svn r847.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Programmer debug messages during programmer init/shutdown are useful
because they print hardware settings and desired configuration.
They help in getting a quick overview of hardware and software state on
startup and shutdown.
Programmer debug messages during flash chip access are mostly a
distraction in logs and should only be enabled if someone is having
problems which are suspected to stem from a programmer hardware or
programmer software bug. Disable those messages by default, they can be
reenabled by #define COMM_DEBUG in the affected programmer file.
An added benefit is a tremendous size reduction in verbose
probe/read/write/erase logs because only flash chip driver messages
remain. In some cases, logs will shrink from 65 MB to 10 kB or less.
The right(tm) fix would be two different debug levels (DEBUG and SPEW)
and the ability to differentiate between programmer debug messages and
flash chip debug messages. Until the design for the message printing
infrastructure is finished, this is the best stop-gap measure we can
get.
Corresponding to flashrom svn r834.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audioahcked@gmail.com>
Some SPI chip drivers and the generic 1-byte SPI chip write functions
didn't include the automatic erase present in other chip drivers.
Since the majority is definitely auto-erase, change the remaining
explicit-erase cases to be auto-erase as well.
Corresponding to flashrom svn r673.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carlos Arnau Perez <cemede@gmail.com>
Some drivers support only a few combinations of read/write length and
return error otherwise. Having a distinct return code for this error
means we can handle it in upper layers.
Corresponding to flashrom svn r653.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Tested-by: Jakob Bornecrantz <wallbraker@gmail.com>
Corresponding to flashrom svn r651.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested it on Epia-m700 worked okay.
Acked-by: Jakob Bornecrantz <wallbraker@gmail.com>
Some SPI opcodes need to be sent in direct succession after each other
without any chip deselect happening in between. A prominent example is
WREN (Write Enable) directly before PP (Page Program). Intel calls the
first opcode in such a row "preopcode".
Right now, we ignore the direct succession requirement completely and it
works pretty well because most onboard SPI masters have a timing or
heuristics which make the problem disappear.
The FT2232 SPI flasher is different. Since it is an external flasher,
timing is very different to what we can expect from onboard flashers and
this leads to failure at slow speeds.
This patch allows any function to submit multiple SPI commands in a
stream to any flasher. Support in the individual flashers isn't
implemented yet, so there is one generic function which passes the each
command in the stream one-by-one to the command functions of the
selected SPI flash driver.
Tested-by: Jakob Bornecrantz <wallbraker@gmail.com>
Corresponding to flashrom svn r645.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Jakob Bornecrantz <wallbraker@gmail.com>
