Move hwaccess.h #include from flash.h to individual drivers.
libflashrom users need flash.h, but they do not care about hwaccess.h
and should not see its definitions because they may conflict with
other hardware access functions and #defines used by the libflashrom
user.
Corresponding to flashrom svn r1549.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Currently spi_aai_write() is implemented without an abstraction
mechanism for the programmer driver. This adds another function
pointer 'write_aai' to struct spi_programmer, which is set to
default_spi_write_aai (renamed spi_aai_write) for all programmers
for now.
A patch which utilises this abstraction in the dediprog driver will
follow.
Corresponding to flashrom svn r1543.
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
All programmer access function prototypes except init have been made
static and moved to the respective file.
A few internal functions in flash chip drivers had chipaddr parameters
which are no longer needed.
The lines touched by flashctx changes have been adjusted to 80 columns
except in header files.
Corresponding to flashrom svn r1474.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
All programmers are now calling programmer registration functions and
direct manipulations of buses_supported are not needed/possible anymore.
Note: Programmers without parallel/LPC/FWH chip support should not call
register_par_programmer().
Additional fixes:
Set max_rom_decode.parallel for drkaiser.
Remove abuse of programmer_map_flash_region in it85spi.
Annotate several FIXMEs in it85spi.
Corresponding to flashrom svn r1463.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
This is related to the spi split patch as discussed in:
http://www.flashrom.org/pipermail/flashrom/2010-February/thread.html#2364
the old commit (r914) log notes:
"Some of the spi programmer drivers required chipdrivers.h, needs fixing later: it87spi.c
ichspi.c sb600spi.c wbsio_spi.c buspirate_spi.c ft2232spi.c bitbang_spi.c dediprog.c"
there still remain a few cases where chipdrivers.h is needed:
dediprog.c (spi_read_chunked and spi_write_chunked)
it87spi.c (due to spi_write_enable and spi_read_status_register)
wbsio_spi.c (spi_programmer registration only)
besides that, there are also non-spi files that do not need it.
also, add flash.h to chipdrivers.h because it uses some types of it
and remove flashchips.h from print.c
Corresponding to flashrom svn r1414.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
- Mixing uninitialized and initialized local variables leads to
confusion.
- ft2232_spi error cases should have gotten some error handling, and
that's the reason the curly braces were there.
- Fixing typos/wording in some places would have been nice given that
those places were touched anyway.
Corresponding to flashrom svn r1413.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
The __func__ variant is standardized in C99 and recommended to be
used instead of __FUNCTION__ in the gcc info page.
See also r711 where we did the same change.
Corresponding to flashrom svn r1401.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Also, indentation fixes, e.g. due to conversion to msg_*, use ARRAY_SIZE
where possible, wrap overly long line, etc.
Compile-tested. There should be no functional changes.
Corresponding to flashrom svn r1397.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
It's shorter to type, and we have less problems with the 80 column limit.
Corresponding to flashrom svn r1396.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
This patch attempts to resolve some programmer shutdown ordering issues
by having the programmer init functions register shutdown callbacks explicitly
wherever it makes most sense. Before, assumptions were made that could lead to
the internal programmer's state changing before the external programmer could be
shut down properly. Now, each programmer cleans up after itself and (hopefully)
performs each operation in the correct order.
As a side-effect, this patch gives us a better usage model for reverse
operations such as rpci_* and rmmio_*. In the long-run, this should make
reversing the initialization process easier to understand, less tedious, and
less error-prone.
In short, this patch does the following:
- Registers a shutdown callback during initialization for each programmer.
- Kills the .shutdown function pointer from programmer_entry struct. Also,
make most shutdown functions static.
- Adds a few minor clean-ups and corrections (e.g. missing physunmap() calls).
TODO: Remove forward declaration of serprog_shutdown() (added to simplify diff)
Corresponding to flashrom svn r1338.
Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Remove the array spi_programmer, replace it by dynamic registration
instead. Also initially start with no busses supported, and switch to
the default non-SPI only for the internal programmer.
Also this patch changes the initialization for the buses_supported variable
from "everything-except-SPI" to "nothing". All programmers have to set the
bus type on their own, and this enables register_spi_programmer to just add
the SPI both for on-board SPI interfaces (where the internal programmer
already detected the other bus types), as well as for external programmers
(where we have the default "none").
Corresponding to flashrom svn r1299.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Flashrom currently only supports exactly one Super I/O or Embedded
Controller, and this means quite a few notebooks and a small subset of
desktop/server boards cannot be handled reliably and easily.
Allow detection and initialization of up to 3 Super I/O and/or EC chips.
WARNING! If a Super I/O or EC responds on multiple ports (0x2e and
0x4e), the code will do the wrong thing (namely, initialize the hardware
twice). I have no idea if we should handle such situations, and whether
we should ignore the second chip with identical ID or not. Initializing
the hardware twice for the IT87* family is _not_ a problem, but I don't
know how well IT85* can handle it (and whether IT85* would listen at
more than one port anyway).
Corresponding to flashrom svn r1289.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Thanks to Thomas Schneider for testing on a board with ITE IT87* SPI.
Test report (success) is here: http://paste.flashrom.org/view.php?id=379
Thanks to David Hendricks for testing on a Google Cr-48 laptop with
ITE IT85* EC SPI. Test report (success) is here:
http://www.flashrom.org/pipermail/flashrom/2011-April/006275.html
Acked-by: David Hendricks <dhendrix@google.com>
Fix a few typos.
Change the EC memory region mapping name.
Drop unused function parameter.
Use mmio_writeb()/mmio_readb() to get reliable access to volatile memory
locations instead of plain pointer access which is optimized away by gcc.
Use own it85_* SPI high-level chip read/write functions instead of
relying on unrelated ICH functions.
Corresponding to flashrom svn r1279.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
David writes:
I applied the patch against the Chromium OS branch and
successfully tested read and write operations on a Cr48.
Acked-by: David Hendricks <dhendrix@google.com>
This code has been deployed and tested to work on the Cr-48.
There are a few caveats, though:
- The boot BIOS straps register must be modified to select LPC. This
can be done with the "select_bbs.sh" script (Install iotools at
http://code.google.com/p/iotools/ before using select_bbs).
- It is very important to disable power management daemons before
running flashrom on this EC. I commented out the brute force method
we use in the Chromium OS branch that disables powerd, since IIRC
Carl-Daniel has a better approach in the works.
- Due to dependencies which may be introduced by the OEM/ODM EC
firmware, the code is not guaranteed to work for anything other than
the Cr-48.
Corresponding to flashrom svn r1263.
Signed-off-by: David Hendricks <dhendrix@google.com>
Carl-Daniel comments:
Code is not hooked up yet because probing needs to be sorted out.
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The patch was developed by Google.
It was tested for IT8500E on a Chrome OS platform and may require
modification depending on ODM/OEM customization and EC firmware version.
This patch is not officially supported by ITE Tech Inc.
Corresponding to flashrom svn r1262.
Signed-off-by: Donald Huang <donald.huang@ite.com.tw>
Signed-off-by: Yung-chieh Lo <yjlou@google.com>
Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
