Add ITE IT8707F/IT8710F detection.
Note that we autodetect those chips, but we don't handle their flash
translation features automatically yet.
Corresponding to flashrom svn r1533.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
This adds the pony_spi driver which supports the SI_Prog adapter, which
is commonly used for SPI chips with PonyProg 2000, and a custom adapter
called "SERBANG" which differs in the logic of two pins.
Corresponding to flashrom svn r1525.
Signed-off-by: Virgil-Adrian Teaca <darkstarlinux@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
The ITE IT87 SPI driver uses a trick to speed up reading and writing:
If a flash chip is 512 kByte or less, the flash chip can be completely
mapped in memory and both read and write accesses are faster that way.
The current IT87 SPI code did use the parallel programmer interface for
memory mapped reads and writes, but that's the wrong abstraction. It has
been fixed to use mmio_read*/mmio_write* for that purpose.
The Winbond W83627 SPI driver uses the same trick in its read path for
all supported chip sizes. Fix it the same way.
Switch internal_chip_readn to use mmio_readn as proper abstraction.
Kudos to Michael Karcher for spotting the bugs.
Tested-by: Johan Svensson <flashrom.js@crypt.se>
Corresponding to flashrom svn r1511.
Reported-by: Johan Svensson <flashrom.js@crypt.se>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Note: The internal programmer will abort during processor check. This is
intentional.
The other hardware drivers (except those using port I/O) should work.
Corresponding to flashrom svn r1492.
Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: David Hendricks <dhendrix@google.com>
Tested-by: Timo Juhani Lindfors <timo.lindfors@iki.fi>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
NOTE:
The --list-supported-wiki output changed to use -p internal:mainboard=
instead of -m
The --list-supported output changed the heading of the mainboard list
from
Vendor Board Status Required option
to
Vendor Board Status Required value for
-p internal:mainboard=
Fix lb_vendor_dev_from_string() not to write to the supplied string.
Corresponding to flashrom svn r1483.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This patch adds an external utility that shares most of the existing descriptor
decoding source code. Additionally to what is available via FDOC/FDOD this
allows to access:
- the softstraps which are used to configure the chipset by flash content
without the need for BIOS routines. on ICH8 it is possible to read those
with FDOC/FDOC too, but this was removed in later chipsets.
- the ME VSCC (Vendor Specific Component Capabilities) table. simply put,
this is an SPI chip database used to figure out the flash's capabilities.
- the MAC address stored in the GbE image.
Intel thinks this information should be confidential for ICH9 and up, but
references some tidbits in their public documentation.
This patch includes the human-readable information for ICH8, Ibex Peak
(5 series) and Cougar Point (6 series); the latter two were obtained from
leaked "SPI Flash Programming Guides" found by google. Data regarding ICH9
and 10 is unknown to us yet. It can probably found in:
"Intel® ICH7, ICH8, ICH9 and ICH10 — SPI Family Flash Programming Guide"
Information regarding the upcoming Panther Point chipset is also not included.
Corresponding to flashrom svn r1480.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Matthias Wenzel <bios@mazzoo.de>
All programmer types (Parallel, SPI, Opaque) now register themselves
into a generic programmer list and probing is now programmer-centric
instead of chip-centric.
Registering multiple SPI/... masters at the same time is now possible
without any problems. Handling multiple flash chips is still unchanged,
but now we have the infrastructure to deal with "dual BIOS" and "one
flash behind southbridge and one flash behind EC" sanely.
A nice side effect is that this patch kills quite a few global variables
and improves the situation for libflashrom.
Hint for developers:
struct {spi,par,opaque}_programmer now have a void *data pointer to
store any additional programmer-specific data, e.g. hardware
configuration info.
Note:
flashrom -f -c FOO -r forced_read.bin
does not work anymore. We have to find an architecturally clean way to
solve this.
Corresponding to flashrom svn r1475.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
All programmer access function prototypes except init have been made
static and moved to the respective file.
A few internal functions in flash chip drivers had chipaddr parameters
which are no longer needed.
The lines touched by flashctx changes have been adjusted to 80 columns
except in header files.
Corresponding to flashrom svn r1474.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Struct flashchip is used only for the flashchips array and for
operations which do not access hardware, e.g. printing a list of
supported flash chips.
struct flashctx (flash context) contains all data available in
struct flashchip, but it also contains runtime information like
mapping addresses. struct flashctx is expected to grow additional
members over time, a prime candidate being programmer info.
struct flashctx contains all of struct flashchip with identical
member layout, but struct flashctx has additional members at the end.
The separation between struct flashchip/flashctx shrinks the memory
requirement of the big flashchips array and allows future extension
of flashctx without having to worry about bloat.
Corresponding to flashrom svn r1473.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Push those changes forward where needed to prevent new sign
conversion warnings where possible.
Corresponding to flashrom svn r1470.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
All programmers are now calling programmer registration functions and
direct manipulations of buses_supported are not needed/possible anymore.
Note: Programmers without parallel/LPC/FWH chip support should not call
register_par_programmer().
Additional fixes:
Set max_rom_decode.parallel for drkaiser.
Remove abuse of programmer_map_flash_region in it85spi.
Annotate several FIXMEs in it85spi.
Corresponding to flashrom svn r1463.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
The type member is enough most of the time to derive the wanted
information, but
- not always (e.g. ich_set_bbar),
- only available after registration, which we want to delay till the
end of init, and
- we really want to distinguish between chipset version-grained
attributes which are not reflected by the registered programmer.
Hence this patch introduces a new static variable which is set up
early by the init functions and allows us to get rid of all "switch
(spi_programmer->type)" in ichspi.c. We reuse the enum introduced
for descriptor mode for the type of the new variable.
Previously magic numbers were passed by chipset_enable wrappers. Now
they use the enumeration items too. To get this working the enum
definition had to be moved to programmer.h.
Another noteworthy detail: previously we have checked for a valid
programmer/ich generation all over the place. I have removed those
checks and added one single check in the init method. Calling any
function of a programmer without executing the init method first, is
undefined behavior.
Corresponding to flashrom svn r1460.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
An opaque programmer does not allow direct flash access and only offers
abstract probe/read/erase/write methods.
Due to that, opaque programmers need their own infrastructure and
registration framework.
Corresponding to flashrom svn r1459.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
- probe_timing was changed to unsigned although we use negative values
for special cases
- some code was not changed along hence did no longer compile:
* dediprog's read and write functions
* linux_spi's read and write functions
- it introduced a number of new sign conversion warnings
(http://paste.flashrom.org/view.php?id=832)
To be safe this patch reverts all changes made in r1448, a corrected
patch will follow later.
Thanks to idwer for pointing out the problem first!
Corresponding to flashrom svn r1450.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Adds a new opcode (0x13) that just relays SPI bytes and wires it up to be
usable within serprog.c. Checks for mandatory opcodes are moved around and
changed a bit, but non-SPI programmers should not be harmed by this patch.
Corresponding to flashrom svn r1442.
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Bugfix: Do not accept multiple conflicting --programmer selections.
Restriction: Do not accept multiple --programmer selections even if
there is no conflict.
Unexport the programmer variable.
programmer_init requires the programmer as first parameter.
The default programmer selection is now part of cli_classic.
Corresponding to flashrom svn r1433.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
See http://www.kernel.org/doc/Documentation/spi/spidev for an introduction.
Usage is as follows:
flashrom -p linux_spi:dev=/dev/spidevX.Y
where X is the bus number, and Y device. It accepts an optional parameter
'speed' which allows to set the SPI clock speed in kHz.
Tested on an Atmel AVR32AP7000 board (NGW100 Network Gateway Kit), see
below, which was used to program a ThinkPad X60, but it should work on every
other Linux system, too.
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4102)
Corresponding to flashrom svn r1427.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
In C++ "class" is a reserved keyword, and as we'll want to use libflashrom
from C++ code at some point, let's make sure it doesn't cause issues.
Other places in the code already used "devclass" anyway, so it also increases
consistency and readability a bit.
Corresponding to flashrom svn r1371.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
This patch attempts to resolve some programmer shutdown ordering issues
by having the programmer init functions register shutdown callbacks explicitly
wherever it makes most sense. Before, assumptions were made that could lead to
the internal programmer's state changing before the external programmer could be
shut down properly. Now, each programmer cleans up after itself and (hopefully)
performs each operation in the correct order.
As a side-effect, this patch gives us a better usage model for reverse
operations such as rpci_* and rmmio_*. In the long-run, this should make
reversing the initialization process easier to understand, less tedious, and
less error-prone.
In short, this patch does the following:
- Registers a shutdown callback during initialization for each programmer.
- Kills the .shutdown function pointer from programmer_entry struct. Also,
make most shutdown functions static.
- Adds a few minor clean-ups and corrections (e.g. missing physunmap() calls).
TODO: Remove forward declaration of serprog_shutdown() (added to simplify diff)
Corresponding to flashrom svn r1338.
Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
CONFIG_INTERNAL implies Super I/O support and NEED_PCI.
NEED_PCI is only used to guard PCI stuff which may be needed for
external PCI-based programmers. That way, using #if NEED_PCI can be
avoided inside #if CONFIG_INTERNAL.
Corresponding to flashrom svn r1326.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Without this the magic numbers need to be kept in sync with the maximum
length of the strings printed in the corresponding column. if not, an
overflow and a nasty ' '-storm occur on executing flashrom -L.
Corresponding to flashrom svn r1318.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Remove the array spi_programmer, replace it by dynamic registration
instead. Also initially start with no busses supported, and switch to
the default non-SPI only for the internal programmer.
Also this patch changes the initialization for the buses_supported variable
from "everything-except-SPI" to "nothing". All programmers have to set the
bus type on their own, and this enables register_spi_programmer to just add
the SPI both for on-board SPI interfaces (where the internal programmer
already detected the other bus types), as well as for external programmers
(where we have the default "none").
Corresponding to flashrom svn r1299.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Handle board-specific quirks in three phases:
1. Before Super I/O probing (e.g. blacklisting of some Super I/O probes,
or unhiding the Super I/O)
2. Before the laptop enforcement decision (e.g. whitelisting a laptop
for flashing)
3. After chipset enabling (all current board enables)
Implementation note: All entries in board_pciid_enables get an
additional phase parameter. Alternative variants (3 tables instead of 1)
also have their downsides, and I chose table bloat over table
multiplication).
With this patch, it should be possible to whitelist supported laptops
with a matching entry (phase P2) in board_pciid_enables which points to
a function setting laptop_ok=1. (In case DMI is broken, matching might
be a little bit more difficult, but it is still doable.)
Corresponding to flashrom svn r1294.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
This moves 99.5% of the .data section to .rodata (which ends up in .text).
Corresponding to flashrom svn r1293.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reversible MMIO space writes now use rmmio_write*().
Reversible PCI MMIO space writes now use pci_rmmio_write*().
If a MMIO value needs to be queued for restore without writing it,
use rmmio_val*().
MMIO space writes which are one-shot (e.g. communication with some chip)
should continue to use the permanent mmio_write* variants.
Corresponding to flashrom svn r1292.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
David tested it successfully on some NM10/ICH7 platforms which switch
between SPI and LPC targets (x86 BIOS ROM vs. EC firmware ROM).
Acked-by: David Hendricks <dhendrix@google.com>
Flashrom currently only supports exactly one Super I/O or Embedded
Controller, and this means quite a few notebooks and a small subset of
desktop/server boards cannot be handled reliably and easily.
Allow detection and initialization of up to 3 Super I/O and/or EC chips.
WARNING! If a Super I/O or EC responds on multiple ports (0x2e and
0x4e), the code will do the wrong thing (namely, initialize the hardware
twice). I have no idea if we should handle such situations, and whether
we should ignore the second chip with identical ID or not. Initializing
the hardware twice for the IT87* family is _not_ a problem, but I don't
know how well IT85* can handle it (and whether IT85* would listen at
more than one port anyway).
Corresponding to flashrom svn r1289.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Thanks to Thomas Schneider for testing on a board with ITE IT87* SPI.
Test report (success) is here: http://paste.flashrom.org/view.php?id=379
Thanks to David Hendricks for testing on a Google Cr-48 laptop with
ITE IT85* EC SPI. Test report (success) is here:
http://www.flashrom.org/pipermail/flashrom/2011-April/006275.html
Acked-by: David Hendricks <dhendrix@google.com>
Fix a few typos.
Change the EC memory region mapping name.
Drop unused function parameter.
Use mmio_writeb()/mmio_readb() to get reliable access to volatile memory
locations instead of plain pointer access which is optimized away by gcc.
Use own it85_* SPI high-level chip read/write functions instead of
relying on unrelated ICH functions.
Corresponding to flashrom svn r1279.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
David writes:
I applied the patch against the Chromium OS branch and
successfully tested read and write operations on a Cr48.
Acked-by: David Hendricks <dhendrix@google.com>
Fix compilation if everything except CONFIG_SATAMV is no.
Do not compile in PCI support for wiki printing if no PCI devices are
supported.
Corresponding to flashrom svn r1278.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Simplify pcidev_init by killing the vendorid parameter which was pretty
useless anyway since it was present in the pcidevs parameter as well.
This also allows us to handle multiple programmers with different vendor
IDs in the same driver.
Fix compilation of flashrom with only the nicrealtek driver.
Corresponding to flashrom svn r1274.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
This code has been deployed and tested to work on the Cr-48.
There are a few caveats, though:
- The boot BIOS straps register must be modified to select LPC. This
can be done with the "select_bbs.sh" script (Install iotools at
http://code.google.com/p/iotools/ before using select_bbs).
- It is very important to disable power management daemons before
running flashrom on this EC. I commented out the brute force method
we use in the Chromium OS branch that disables powerd, since IIRC
Carl-Daniel has a better approach in the works.
- Due to dependencies which may be introduced by the OEM/ODM EC
firmware, the code is not guaranteed to work for anything other than
the Cr-48.
Corresponding to flashrom svn r1263.
Signed-off-by: David Hendricks <dhendrix@google.com>
Carl-Daniel comments:
Code is not hooked up yet because probing needs to be sorted out.
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Add more sanity checks for BARs and abort if resources are unreachable.
Undecoded resources are reported, but flashrom will proceed anyway just
in case the BIOS screwed up the configuration.
(The empty CardBus handler is intentional, according to the spec no BARs
in PCI config space are used by CardBus.)
Found while working on a driver for the Angelbird PCIe-based SSD which
has 64-bit capable MEM BARs.
Corresponding to flashrom svn r1261.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
It uses a Marvell 88SX7042 SATA controller internally which has access
to a separate flash chip hosting the option ROM.
Thanks to Angelbird Ltd for sponsoring development of this driver!
I expect the code to work for that SATA controller even if it is not
part of the Angelbird SSD.
Corresponding to flashrom svn r1258.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This corrects a djgpp build error, seen with r1232 and later.
pcidev.c:210: error: conflicting types for 'rpci_write_long'
programmer.h:226: error: previous declaration of 'rpci_write_long' was here
Corresponding to flashrom svn r1249.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
The project is in the the process of designing and making a complete,
open source, graphics card. More info at http://wiki.opengraphics.org.
The first development card is a PCI add in card containing a couple of
FPGAs and a couple of serial flash chips (amongst other things). The
FPGAs are called XP10 and S3 (their part numbers). The XP10 contains its
own flash and does not need to be programmed by flashrom - it ensures
that the device can enumerate on the PCI bus without needing further
configuration.
The larger FPGA is the S3. This is configured from a large SPI flash
(2 MBytes). The second SPI flash is used to store the VGA BIOS. It is
smaller (128 KBytes). This patch adds support for programming either of
the two SPI flash chips.
The programmer device takes one configuration option which selects which
of the two flash chips is accessed. This must be set to either "cprom"
or "bprom". (The project refers to the two chips as "cprom" / "bprom",
"s3" and "bios" are more readable alternatives).
Add support for SST SST25VF010 (REMS). Mark SST SST25VF016B as tested
for write.
Corresponding to flashrom svn r1241.
Signed-off-by: Mark Marshall <mark.marshall@csr.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Please note that the write speedup only applies to chips which have SPI
page write (i.e. chips using spi_chip_write_256).
This is a quick fix for write speed until I get around to implementing
full bulk SPI write support.
Corresponding to flashrom svn r1235.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Richard A. Smith <richard@laptop.org>
Acked-by: Mathias Krause <mathias.krause@secunet.com>
This means all chipset enables etc. will be undone on shutdown.
Reversible PCI config space writes now use rpci_write_*().
PCI config space writes which are one-shot (e.g. communication via
config space) should continue to use the permanent pci_write_*
variants.
Extend the number of available register_shutdown slots to 32.
Corresponding to flashrom svn r1232.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
SPI bitbanging on devices which speak SPI natively has a dual-use
problem: We need to shut down normal SPI operations to do the bitbanging
ourselves. Once we're done, it makes a lot of sense to reenable "normal"
SPI operations again. Add request_bus/release_bus functions to struct
bitbang_spi_master.
Add a bitbang shutdown function (not used yet).
Change MCP SPI and Intel NIC SPI to use the new request/release bus
infrastructure.
Cosmetic changes to a few error messages (80 column limit).
There are multiple possible strategies for bus request/release:
- Request at the start of a SPI command, release immediately afterwards.
- Request at the start of a SPI multicommand, release once all commands
of the multicommand are done.
- Request on programmer init, release on shutdown.
Each strategy has its own advantages. For now, we will stay with the
first strategy which worked fine so far.
Corresponding to flashrom svn r1171.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Tested on a 82541PI (0x8086, 0x107c) using 32-bit hardware.
The last line in nicintel_request_spibus() could be changed so that FL_BUSY
is used instead.
Shortened sample log:
[...]
Found "Intel 82541PI Gigabit Ethernet Controller" (8086:107c, BDF 01:03.0).
Found chip "ST M25P10.RES" (128 KB, SPI) at physical address 0xfffe0000.
Multiple flash chips were detected: M25P05.RES M25P10.RES
Please specify which chip to use with the -c <chipname> option.
[...]
Corresponding to flashrom svn r1151.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
- Fix incorrect whitespace, indentation, and coding style in some places.
- Drop '/**' Doxygen comments, we don't use Doxygen. Even if we would use
it, the comments are useless as we don't have any Doxygen markup in there.
- Use consistent vendor name spelling as per current website (NVIDIA,
abit, GIGABYTE).
- Use consistent / common format for "Suited for:" lines in board_enable.c.
- Add some missing 'void's in functions taking no arguments.
- Add missing fullstops in sentences, remove them from non-sentences (lists).
Corresponding to flashrom svn r1134.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Add support for the Amontec JTAGkey2, see
http://www.amontec.com/jtagkey2.shtmlhttp://www.amontec.com/jtagkey.shtml.
This FTDI 2232H variant has an additional output enable, which will be
set to its "on" (L) when CS is pulled low. But it lacks a power supply
and you need an external 3.3V source.
The attached patch adds "jtagkey" as "type" parameter for ft2232_spi. It
should work with all JTAGkeys (JTAGkey, JTAGkey-tiny and JTAGkey2) but I
only have a JTAGkey2 here for testing.
Add all FT2232H/FT4232H based programmers to the list printed with
flashrom -L
Corresponding to flashrom svn r1119.
Signed-off-by: Jörg Fischer <turboj@gmx.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Huge thanks go to Michael Karcher for reverse engineering the interface
and to Johannes Sjölund for testing the first iterations of my patch on
his hardware until it worked.
Thanks to the following testers of the patch:
* MCP61, 10de:03e0, LPC OK, ECS Geforce6100SM-M, Andrew Cleveland
* MCP61, 10de:03e0, LPC OK, Biostar NF520-A2 NF61D-A2, Vitaliy Buchynskyy
* MCP65, 10de:0441, SPI OK, MSI MS-7369 K9N Neo-F v2, Kjell Braden
* MCP65, 10de:0441, SPI OK, MSI MS-7369, Wolfgang Schnitker
* MCP65, 10de:0441, SPI OK, MSI MS-7369, Johannes Sjölund
* MCP65, 10de:0441, SPI OK, MSI MS-7369, Melchior Franz
* MCP78S, 10de:075c, SPI OK, Asus M3N78 PRO, Brad Rogers
* MCP78S, 10de:075c, SPI OK, Asus M3N78-VM, Marcel Partap
* MCP78S, 10de:075c, SPI OK, Asus M4N78 PRO, Kimmo Vuorinen
* MCP78S, 10de:075c, SPI OK, Asus M4N78 PRO, Vikram Ambrose
* MCP79, 10de:0aad, SPI OK, Acer Aspire R3600, Andrew Morgan
* MCP79, 10de:0aae, LPC ??, Lenovo Ideapad S12 laptop, Christian Schmitt
* MCP79, 10de:0aae, SPI OK, Apple iMac9,1 Mac-F2218EA9, David "dledson"
flashrom will refuse to write/erase for safety reasons if MCP6x/MCP7x
SPI is detected.
Corresponding to flashrom svn r1113.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Programmer specific functions are of absolutely no interest to any file
except those dealing with programmer specific actions (special SPI
commands and the generic core).
The new header structure is as follows (and yes, improvements are
possible):
flashchips.h flash chip IDs
chipdrivers.h chip-specific read/write/... functions
flash.h common header for all stuff that doesn't fit elsewhere
hwaccess.h hardware access functions
programmer.h programmer specific functions
coreboot_tables.h header from coreboot, internal programmer only
spi.h SPI command definitions
Corresponding to flashrom svn r1112.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
