Unistd.h was only used to get a definition of NULL in all files. Add our
own NULL #define and remove unistd.h from flash.h
stdio.h has no place in flash.h, it should be included only in files
which really need it.
Add #include statements in individual .c files where needed.
Replace a few printf with msg_* to eliminate the need for stdio.h.
Corresponding to flashrom svn r1021.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
At least it's addressed as 'Pro' in the list of boards, which requires
board_enable.
See also:
http://www.flashrom.org/pipermail/flashrom/2009-July/000003.html
Corresponding to flashrom svn r1015.
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
- x86/x86_64 (little endian)
- PowerPC (big endian)
- MIPS (big+little endian)
No changes to programmer specific code. This means any drivers with MMIO
access will _not_ suddenly start working on big endian systems, but with
this patch everything is in place to fix them.
Compilation should work on all architectures listed above for all
drivers except nic3com and nicrealtek which require PCI Port IO which is
x86-only for now.
To compile without nic3com and nicrealtek, run
make distclean
make CONFIG_NIC3COM=no CONFIG_NICREALTEK=no
Thanks to Misha Manulis for testing early versions of this patch on
PowerPC (big endian) with the satasii programmer.
Thanks to Segher Boessenkool for design review and for helping out with
compiler tricks and pointing out that we need eieio on PowerPC.
Thanks to Vladimir Serbinenko for compile testing on MIPS (little
endian) and PowerPC (big endian) and for runtime testing on MIPS (little
endian).
Thanks to David Daney for compile testing on MIPS (big endian).
Thanks to Uwe Hermann for compile and runtime testing on x86_64.
DO NOT RUN flashrom ON NON-X86 AFTER APPLYING THIS PATCH!
This patch only provides the infrastructure, but does not convert any
drivers, so flashrom will compile, but it won't do the right thing on
non-x86 platforms.
Corresponding to flashrom svn r1013.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Misha Manulis <misha@manulis.com>
Acked-by: Vladimir 'phcoder/φ-coder' Serbinenko <phcoder@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Corresponding to flashrom svn r1010.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Marc Bertens <mbertens@xs4all.nl>
Read class info manually and store it in a separate variable.
Corresponding to flashrom svn r1004.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Convert programmer print messages to msg_p* convert general print messages to msg_g* a few fixes as suggested by Carl-Daniel.
Corresponding to flashrom svn r997.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Corresponding to flashrom svn r993.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Tom Brand <worntreads@sbcglobal.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
- Fix a number of typos (found via ispell).
- Use correct vendor names (as per their websites) consistently.
Corresponding to flashrom svn r985.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Move boards which had an IT87* SPI board enable from the board enable
list to the OK list.
Mark the Gigabyte GA-MA78GPM-DS2H as OK.
Change the it87spi forced port parameter to it87spiport=...
Fix incorrect indentation in the man page.
Tested by Ward Vandewege on both variants of the Gigabyte GA-M57SLI-S4
http://www.flashrom.org/pipermail/flashrom/2010-March/002712.html
Tested by 李彥學 (Ian-Xue Li) on the Gigabyte GA-MA78GPM-DS2H
http://www.flashrom.org/pipermail/flashrom/2010-March/002723.html
Corresponding to flashrom svn r983.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ward Vandewege <ward@gnu.org>
Abit VT6X4 / W29C020C: See
http://www.coreboot.org/pipermail/flashrom/2010-March/002730.html
Fixes typo in comment and marks board-enable as tested (the flashrom
running on that machine was patched with the board enable that got
in later).
Asus A7V133 / Atmel AT29C010A: See
http://www.coreboot.org/pipermail/flashrom/2010-March/002729.html
Adding "erase" to tested as there is only one erase function.
Corresponding to flashrom svn r975.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Original patch by: Luc Verhaegen.
Corresponding to flashrom svn r958.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Sean Nelson <audiohacked@gmail.com>
Rebased.
IDs are ISA and SMBus.
Added DMI string to match 3 HP boards: Nagami, Nagami2, Nagami2L.
This could match any HP Nagami board. Needs testing.
Corresponding to flashrom svn r957.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Sean Nelson <audiohacked@gmail.com>
This board (GA-MA74GM-S2H) has the same list of pciids as the GA-MA78M-S2H,
so I narroved search conditions by populating corresponding board_pciid_enable
entry for GA-MA78M-S2H with DMI pattern.
Untested!
Corresponding to flashrom svn r956.
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Acked-by: Sean Nelson <audiohacked@gmail.com>
Corresponding to flashrom svn r955.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Sean Nelson <audiohacked@gmail.com>
The board enable for the VT6X4 committed in r950 actually depended on this commit.
Corresponding to flashrom svn r954.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Sean Nelson <audiohacked@gmail.com>
Patch by Chris <zinx+flashrom@zenthought.org>
Corresponding to flashrom svn r952.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Sean Nelson <audiohacked@gmail.com>
This board has no subsystem IDs, but thankfully the DMI patch is in
now, which is a real life safer. There are *WAY* to many 440BX/PIIX4
boards out there to match this without DMI.
Corresponding to flashrom svn r951.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Sean Nelson <audiohacked@gmail.com>
This board has *no* usable IDs at all, neither DMI nor PCI
subsystem IDs. You have to force it using "-m abit:vt6x4"
Try 3: really correct polarity of the GPIO
Corresponding to flashrom svn r950.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Sean Nelson <audiohacked@gmail.com>
This board has a supported chipset and a supported bios, but it's
connected indirectly through IT8716 and not recognized.
Corresponding to flashrom svn r935.
Signed-off-by: Raúl Soriano <GatoLoko@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
- Fix coding-style, whitespace, and indentation in a few places.
- Consistently use the same spelling ("Super I/O") everywhere.
Corresponding to flashrom svn r933.
- Make some flashrom stdout output look a bit nicer.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Was introduced in r926. Found by Henrik Kretzschmar <henne@nachtwindheim.de>.
Corresponding to flashrom svn r930.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Maciej Pijanka <maciej.pijanka@gmail.com>
I have an ASUS A7V8X-X, the BIOS programming requires a write-enable. It
has an IT8712F, just like the A7V600-X.
Corresponding to flashrom svn r929.
Signed-off-by: Russ Dill <Russ.Dill@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
This also checks the testedness of boards in all cases, not just for
PCI/DMI detection.
Corresponding to flashrom svn r926.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Board enable code is untested, marked as such.
Corresponding to flashrom svn r925.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Sean Nelson <audiohacked@gmail.com>
This code has been tested by Mattias Mattsson on 23. December 2009,
but without the DMI match. Now that DMI support is in and working,
the board can be added to mainline flashrom.
board info: http://www.coreboot.org/pipermail/flashrom/2009-December/001440.html
Corresponding to flashrom svn r923.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Sean Nelson <audiohacked@gmail.com>
This board is like the IP35. Just changed the IDs to match.
Corresponding to flashrom svn r920.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Timothy Lepre <Klavious@gmail.com>
The message printing code greatly exceed the 80 character limit. I can
reformat it on request to obey the limit.
Intended behaviour:
on untested boards an explanation of that status is printed and the board
enable code is not run, unless the option "boardenable=force" has been
passed to the internal programmer.
Corresponding to flashrom svn r919.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Sean Nelson <audiohacked@gmail.com>
Intel datasheet says "byte accesses only". Looks like they mean it.
Also fix use of or instead of and for lowering GPOs.
Corresponding to flashrom svn r910.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Luc Verhaegen <libv@skynet.be>
The rules may change in the future, but right now it is important that
the comments match the code.
Corresponding to flashrom svn r893.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This is needed for the Intel SE440BX-2 as well as the Asus P5A.
Corresponding to flashrom svn r892.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
(Re-)tested on hardware, detection works OK.
Corresponding to flashrom svn r890.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
The board doesn't need a board-enable, writing works out of the box.
Also, the board can only decode 256KB. I verified this by writing a 512KB
image of random bytes (which fails), whereas 256KB of random bytes can be
written correctly.
Corresponding to flashrom svn r887.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Add this information to the new field in the board-enable table. We match the
board via two sets of PCI IDs. However, as we don't need a board-enable
function for this board (it works out of the box; well, at least if you remove
the JP9 jumper on the board), change the code to allow NULL as value for
the board-enable function. There will likely be more boards in the future where
we want to record a maximum decode size but which don't need a board-enable.
This is hardware-tested on the GIGABYTE GA-7ZM by successfully writing a 512KB
image of random bytes to a chip in this board.
Corresponding to flashrom svn r885.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Sean Nelson <audiohacked@gmail.com>
Should be functionally the same as it8705f_write_enable_2e.
Corresponding to flashrom svn r876.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
This is a quick fix for board specific parallel addressing limits.
Corresponding to flashrom svn r875.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Sean Nelson <audiohacked@gmail.com>
If a board is not uniquely identifiable by PCI device/subsystem IDs, a
string can be specified to be looked for (case-sensitive, substring or
anchored) for now in one of the following DMI items in addition to matching
the PCI IDs:
- System Manufacturer
- System Product Name
- System Version
- Baseboard Manufacturer
- Baseboard Product Name
- Baseboard Version
Strings are anchored re-like (^ at the beginning, $ at the end), but
there are no plans to support full regular expressions and matched to any
of the mentioned fields.
The match is only made if DMI info is available and the string matches.
If no DMI info is available and the PCI IDs match, a warning is printed
as the board can not be autodetected.
It's still open to discussion whether we add an DMI override switch to
specify a string that will definitely match, and whether this switch is
only used if no DMI is available or whether it overrides or augments DMI
data.
DMI data is currently read using dmidecode. This tool is available for
all major platforms except MacOS X. I heard that there also is a MacOS X
version of dmidecode, but didn't investigate that.
Corresponding to flashrom svn r874.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This (hopefully obviously correct) patch fixes the issue. As a previous
version (before adding the debugging statement) was already executed on
the board, the missing OUTW was executed on the testers machine on an
earlier flashrom run.
Corresponding to flashrom svn r846.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Luc Verhaegen <libv@skynet.be>
Only done for VT8237R (possibly needed for VT8237 too), VT8235 does
not need this (even if the original bios does so: Asus A7V8X-MX SE,
MSI KT4V were verified).
This then opens a floodgate of cleanups in the board enables.
* EPIA SP board enable vanishes, taking EPIA CN match with it.
* Asus A7V8X-MX/Tyan S2498 board enable then equals
w836xx_memw_enable_2e
* AOpen vKM400Am-S board enable then equals it8705_rom_write_enable
* Epia M board enable becomes via_vt823x_gpio15_raise
* Epia N board enable becomes via_vt823x_gpio9_raise
* Asus M2V-MX board enable becomes via_vt823x_gpio5_raise
* vt823x_gpio_set becomes via_vt823x_gpio_set, and now detects ISA
bridge itself, in concordance with intel ich and nvidia mcp gpio.
Corresponding to flashrom svn r815.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
We could run it after chipset enable, but it definitely has to happen
before board enable because the board enable usually accesses the
SuperI/O. With this patch, it is possible to add a struct superio to the
board enable table for more accurate matching in case subsystem IDs are
ambiguous. This patch focuses on the generic infrastructure aspect and
on support for IT8712F/IT8716F.
Thanks go to Adrian Glaubitz and Ward Vandewege for testing.
Corresponding to flashrom svn r813.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
- CK804, MCP04, MCP2 use the isa bridges..
- Newer nvidia mcp's do use the smbus controllers (Found by
Michael Karcher).
- gpio line check breaks EPoX EP-8RDA3+, and should be wider.
Corresponding to flashrom svn r810.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
