Use pci_dev_find() instead of setting up a filter and iterating over PCI
devices.
Corresponding to flashrom svn r464.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
- Check for read/write protected regions first.
- Region protection is write-once according to the data sheets. Check if
the write succeeded. Don't write if the region is not protected.
- Verbose region protection dumping.
- Improve readability of BAR mapping code.
- Align BAR mapping to a page boundary (4k) instead of a 16k boundary.
This patch prepares the code for a SPI detection heuristic.
Corresponding to flashrom svn r463.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
Open fails so there is no reason to lseek in. Actually this is a trivial
fix for a bad return value from open.
Corresponding to flashrom svn r462.
Signed-off-by: Bertrand Jacquin <beber@meleeweb.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Only access LPC ROM if we boot via LPC ROM. Only access SPI ROM if we
boot via SPI ROM.
The code to force enable SPI is commented out in case someone wants to
reenable it for a particular board with LPC and SPI flash.
Corresponding to flashrom svn r459.
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Corresponding to flashrom svn r429 and coreboot v2 svn r4117.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
It needs to have opcodes initialized same way as ICH7.
Corresponding to flashrom svn r413 and coreboot v2 svn r3926.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Peter Stuge <peter@stuge.se>
Corresponding to flashrom svn r397 and coreboot v2 svn r3903.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>
Corresponding to flashrom svn r384 and coreboot v2 svn r3869.
Signed-off-by: FENG yu ning <fengyuning1984@gmail.com>
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: FENG yu ning <fengyuning1984@gmail.com>
Corresponding to flashrom svn r372 and coreboot v2 svn r3849.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Corresponding to flashrom svn r371 and coreboot v2 svn r3848.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* add a generic preop-opcode-pair table.
* rename ich_check_opcodes to ich_init_opcodes.
* let ich_init_opcodes do not need to access flashchip structure:
. move the definition of struct preop_opcode_pair to a better place
. remove preop_opcode_pairs from 'struct flashchip'
. modify ich_init_opcodes and generate_opcodes so that they do not access the flashchip structure
* call ich_init_opcodes during chipset enable. Now OPCODES generation mechanism works.
* fix a coding style mistake.
Corresponding to flashrom svn r367 and coreboot v2 svn r3814.
Signed-off-by: FENG yu ning <fengyuning1984@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
Corresponding to flashrom svn r364 and coreboot v2 svn r3805.
Signed-off-by: FENG yu ning <fengyuning1984@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
This patch adds SB700 support to flashrom. The code for enabling the flash
rom is the same as for SB600. It was tested (read, write, verify) with an
ASUS M3A-H/HDMI which contains a Macronix MX25L8005.
Corresponding to flashrom svn r361 and coreboot v2 svn r3799.
Signed-off-by: Niels Ole Salscheider <niels_ole@salscheider-online.de>
Acked-by: Peter Stuge <peter@stuge.se>
This has been tested by Uwe Hermann on an RS690/SB600 board.
Corresponding to flashrom svn r351 and coreboot v2 svn r3779.
Signed-off-by: Jason Wang <Qingpei.Wang@amd.com>
Reviewed-by: Joe Bao <zheng.bao@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
This helps a lot if we have to track down configuration weirdnesses.
Corresponding to flashrom svn r338 and coreboot v2 svn r3723.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Corresponding to flashrom svn r332 and coreboot v2 svn r3706.
Signed-off-by: Ed Swierk <eswierk@aristanetworks.com>
Acked-by: Ed Swierk <eswierk@aristanetworks.com>
Untested, but should work just as well as the other *PIIX* southbridges
according to the datasheets.
Corresponding to flashrom svn r330 and coreboot v2 svn r3696.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Corresponding to flashrom svn r326 and coreboot v2 svn r3669.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Based on the 5595 datasheet and uniflash 1.40 sources, only looking for info
about SiS620.
Corresponding to flashrom svn r325 and coreboot v2 svn r3668.
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
It is not possible to write enable that area once the register is set so
print a warning.
Corresponding to flashrom svn r324 and coreboot v2 svn r3659.
Signed-off-by: Marc Jones <marcj.jones@amd.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The ICH9 and ICH10 data sheets are identical regarding FWH/SPI flash
interfaces, so this just adds the required PCI IDs.
Corresponding to flashrom svn r323 and coreboot v2 svn r3648.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
Corresponding to flashrom svn r298 and coreboot v2 svn r3414.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
At some point the flash bus will be part of struct flashchip.
Pardon me for pushing this in, but I think it is important to beware of further
decay and it will improve things for other developers in the short run.
Carl-Daniel, I will consider your suggestions in another patch. I want to keep
things from getting too much for now. The patch includes Rudolf's VIA SPI
changes though.
Corresponding to flashrom svn r285 and coreboot v2 svn r3401.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
It is similar with few documented exceptions to ICH7 SPI controller.
Corresponding to flashrom svn r282 and coreboot v2 svn r3398.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Peter Stuge <peter@stuge.se>
r3393 assumed that ICH7 always used SPI. This patch resets ich7_detected back
to 0 when BOOT BIOS Straps indicate something else than SPI.
Also fixes a build error in ichspi.c with gcc 4.2.2.
Corresponding to flashrom svn r280 and coreboot v2 svn r3395.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* ICH7 SPI support
* fix some variable names in ichspi.c (Offset -> offset)
* Dump ICH7 SPI bar with -V
* Improve error message in case IOPL goes wrong. (It might not even be an IOPL)
Corresponding to flashrom svn r278 and coreboot v2 svn r3393.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
- Fix typos and inconsistencies.
- Drop duplicate line which tells us the chip name twice.
- Also print the chip vendor, not only the name.
Corresponding to flashrom svn r249 and coreboot v2 svn r3348.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
This patch addresses different argument order of outX() calls,
FreeBSD-specific headers, difference in certain type names and system
interface names, and also FreeBSD-specific way of gaining IO port
access.
Corresponding to flashrom svn r245 and coreboot v2 svn r3344.
Signed-off-by: Andriy Gapon <avg@icyb.net.ua>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Add ICH8 support to the ICH9 code.
Corresponding to flashrom svn r241 and coreboot v2 svn r3327.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
This is done by using the generic SPI interface.
Corresponding to flashrom svn r239 and coreboot v2 svn r3325.
Signed-off-by: Dominik Geyer <dominik.geyer@kontron.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Corresponding to flashrom svn r220 and coreboot v2 svn r3275.
Signed-off-by: Bari Ari <bari@onelabs.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Straight from the datasheet, untested.
Corresponding to flashrom svn r215 and coreboot v2 svn r3167.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Functionality (except printing) should be unchanged.
Corresponding to flashrom svn r207 and coreboot v2 svn r3144.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Ward says:
This code detects the ICH8 chipset on my laptop, and it appears to use
SPI.
Acked-by: Ward Vandewege <ward@gnu.org>
Cosmetic changes in some files, partly bending the 80-characters-per-line
rule in this special case, as the 80-character-limited version looks
equally crappy even in an 80x25 console/xterm, so let's make it at least
look good in a high-resolution xterm.
Corresponding to flashrom svn r203 and coreboot v2 svn r3139.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
- Remove the "enable write to flash" message, as the caller appears to
already report that.
- Move the 'modprobe msr' suggestions to the first lseek64 error handling, as
we get an error there already.
- Rename a perror string from "read" to "read msr", as we use the latter
already in this function for another read.
Corresponding to flashrom svn r195 and coreboot v2 svn r3101.
Signed-off-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Also, move a big code comment to the top of enable_flash_cs5536().
Corresponding to flashrom svn r193 and coreboot v2 svn r3098.
Signed-off-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
This implements support for devices using AMD Geode companion chip
CS5536 that have the Boot ROM on NOR flash that is directly connected to
FLASH_CS3 (Boot Flash Chip Select). We need to write enable it in the
NORF_CTL MSR register for flashrom to be able to write to it, including
JEDEC probe commands.
This patch allows us to stop using AMD gx_utils.ko for BIOS flashing on
the DBE61.
Corresponding to flashrom svn r192 and coreboot v2 svn r3097.
Signed-off-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Corresponding to flashrom svn r188 and coreboot v2 svn r3078.
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Peter Stuge <peter@stuge.se>
Tested on the pcengines alix1c and works fine.
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Also, s/0xFF80/0xFFC0/ in the Acorp 6A815EPD board-enable, as per
http://www.linuxbios.org/pipermail/linuxbios/2007-December/027750.html
Corresponding to flashrom svn r162 and coreboot v2 svn r2997.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Attached is a patch that enables AMD Geode CS5536 chipset support. I
have tested it successfully on a MSM800 board from digital logic.
Corresponding to flashrom svn r160 and coreboot v2 svn r2967.
Signed-off-by: Lane Brooks <lbrooks@mit.edu>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
