mirror of
https://review.coreboot.org/flashrom.git
synced 2025-04-30 00:13:43 +02:00
1dfe0ff174
Right now, the annotation only differentiates between SPI and non-SPI. Anyone who knows more about a specific flash chip should feel free to update it. The existing flashbus variable was abused to denote the SPI controller type. Use an aptly named variable for that purpose. Once this patch is merged, the chipset/programmer init functions can set supported flash chip types and flashrom can automatically select only matching probe/read/erase/write functions. A side benefit of that will be the elimination of the Winbond W29EE011 vs. AMIC A49LF040A conflict. Corresponding to flashrom svn r556. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
-------------------------------------------------------------------------------
flashrom README
-------------------------------------------------------------------------------
flashrom is a utility for reading, writing, verifying and erasing flash ROM
chips. It's often used to flash BIOS/EFI/coreboot/firmware images in-system
using a supported mainboard, but it also supports flashing of network
cards (NICs), SATA controller cards, and other external devices which can
program flash chips.
It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32, and
TSOP40 chips, which use various protocols such as LPC, FWH, parallel flash,
or SPI.
(see http://coreboot.org for details on coreboot)
Build Instructions
------------------
To build flashrom you need to install the following packages or ports:
Linux et al:
* pciutils
* pciutils-devel / pciutils-dev / libpci-dev
* zlib-devel / zlib1g-dev
On FreeBSD, you need the following ports:
* devel/gmake
* devel/libpci
To compile on Linux, use:
make
To compile on FreeBSD, use:
gmake
To compile on Solaris, use:
gmake LDFLAGS="-L$pathtolibpci -lpci -lz" CC="gcc -I$pathtopciheaders" \
CFLAGS=-O2
To compile on DragonFly BSD, use:
ln -s /usr/pkg/include/pciutils pci
gmake CFLAGS=-I. LDFLAGS="-L/usr/pkg/lib -lpci -lz"
To compile and run on Darwin/Mac OS X:
Install DirectIO from coresystems GmbH.
DirectIO is available at http://www.coresystems.de/en/directio.
Installation
------------
In order to install flashrom and the manpage into /usr/local, type:
sudo make install
For installation in a different directory use DESTDIR, e.g. like this:
sudo make DESTDIR=/usr install
Usage / Options
---------------
Please see the flashrom(8) manpage.
Exit status
-----------
Please see the flashrom(8) manpage.
coreboot Table and Mainboard Identification
--------------------------------------------
Please see the flashrom(8) manpage.
ROM Layout Support
------------------
Please see the flashrom(8) manpage.
Supported Flash Chips / Chipsets / Mainboards
---------------------------------------------
Please check the output of 'flashrom -L' for the list of supported
flash chips, chipsets/southbridges, mainboards, and flash programmers.
Website
-------
The official flashrom website is:
http://coreboot.org/Flashrom