mirror of
https://review.coreboot.org/flashrom.git
synced 2025-04-27 15:12:36 +02:00
e0ed3b20df
The STLinkV3 Mini does not support the bridge API, it return LIBUSB_IO_ERROR when querying the bridge version. The official ST updater does not lists the bridge version in the info screen. Due to it's construction (additional connector on the bottom) it is likely that ST disabled the bridge functions on the castellated pads. Change-Id: Ic1ea4ca7acedca5d374cff8fcef450c18e55a9e8 Signed-off-by: Miklos Marton <martonmiklosqdev@gmail.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/83921 Reviewed-by: Anastasia Klimchuk <aklm@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
flashrom README
===============
flashrom is a utility for detecting, reading, writing, verifying and erasing
flash chips. It is often used to flash BIOS/EFI/coreboot/firmware images
in-system using a supported mainboard, but it also supports flashing of network
cards (NICs), SATA controller cards, and other external devices which can
program flash chips.
It supports a wide range of flash chips (most commonly found in SOIC8, DIP8,
SOIC16, WSON8, PLCC32, DIP32, TSOP32, and TSOP40 packages), which use various
protocols such as LPC, FWH, parallel flash, or SPI.
Do not use flashrom on laptops (yet)! The embedded controller (EC) present in
many laptops might interact badly with any attempts to communicate with the
flash chip and may brick your laptop.
Please make a backup of your flash chip before writing to it.
Please see the flashrom(8) manpage :doc:`classic_cli_manpage`.
Building / installing / packaging
---------------------------------
flashrom is built with **meson**. TLDR:
::
meson setup builddir
meson compile -C builddir
meson test -C builddir
meson install -C builddir
For full detailed instructions, follow the information in
:doc:`dev_guide/building_from_source`
Contact
-------
The official flashrom website is:
https://www.flashrom.org/
For available contact methods see :doc:`contact`