Normally the info would be added in the same patch, but these efforts
were ongoing in parallel with release prep, which makes it hard to
modify devel.rst at the same time.
Change-Id: Ic852df125c9740d95dc1b9ad8ad97bfd56d40211
Signed-off-by: Anastasia Klimchuk <aklm@flashrom.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/86060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Peter Marheine <pmarheine@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested probe, read, erase, write on FS512SAIF01 chips
using Linux SPI and DediProg SF100 programmers.
This change affects S25FL512S identification as well,
so that both chips can be unambiguously detected by probing.
Datasheets used:
* Infineon-S25FS512S_512_Mb_1-DataSheet-v16_00-EN.pdf
at https://www.infineon.com/dgdl/?fileId=8ac78c8c7d0d8da4017d0ed681a356fe
* Infineon-S25FL512S_512_Mb_64_MB_FL-S_Flash_SPI_Multi-I_O_3-DataSheet-v21_00-EN.pdf
at https://www.infineon.com/dgdl/?fileId=8ac78c8c7d0d8da4017d0ed046ae4b53
Change-Id: I40b6c081ec7d57eac4f6d2b69cea3878bc92bb47
Signed-off-by: Anton Samsonov <devel@zxlab.ru>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/85585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
Updated the serprog overview page with info about the Glasgow
Interface Explorer as a valid programmer.
Wasn't able to test as the project wouldnt compile with meson for me
(MacOS 15.1) but tried to make it as similar as possible to what was
already there.
Change-Id: Iabcec27dd675485c69875178858c604ce5c3da29
Signed-off-by: Cattus QQ <cattusqq@gmail.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/85527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
This is follow up (or fix) for
commit 26a1eb514ccefc61b110068cf0eea73c397ba045
When probing opcode, all opcodes in POSSIBLE_OPCODES are reported as
supported, even if the opcode is not in curopcodes. This is relying
on reprogramming on-the-fly to handle the gap between POSSIBLE_OPCODES
and curopcodes. However, for locked chipsets on-the-fly is not
happening (is not possible, since list of opcodes is locked), so we
can't rely on it.
So, we need to check whether chipset is locked.
Ticket: https://ticket.coreboot.org/issues/573
Change-Id: I701a86f030cfef43a1158bf075287ade569254e6
Signed-off-by: Anastasia Klimchuk <aklm@flashrom.org>
Tested-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/85592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nikolai Artemiev <nartemiev@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
This is a simple refactor that aims to simplify maintenance and to
clarify file dependency inside the project.
Currently, many declarations reside in flash.h making it difficult to
really understand file dependency.
Change-Id: I4209d5ed205ca14c39e83aa923e103b7282a7059
Signed-off-by: Antonio Vázquez Blanco <antoniovazquezblanco@gmail.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/85134
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
Make the filename parameter directly following -r/-w/-v optional, since
the -i parameter allows the image to be written to be sourced from
multiple files, regions to be read from flash and written to separate
image files, and regions to be verified using an image file only
containing that region.
Since the filename parameter following -w/-v was ignored when a
filename was specified following `-i <region>:<filename>`, this patch
essentially removes the requirement to provide an unused parameter.
Based on https://review.coreboot.org/c/flashrom/+/52362.
TEST=run the following commands on a supported board:
flashrom -p internal -r /tmp/coreboot.rom
flashrom -p internal -r --ifd -i bios:/tmp/coreboot.rom
flashrom -p internal -r /tmp/coreboot.rom --ifd -i bios:/tmp/bios.bin
flashrom -p internal -w /tmp/coreboot.rom
flashrom -p internal -w --ifd -i bios:/tmp/coreboot.rom
flashrom -p internal -w /tmp/coreboot.rom --ifd -i bios:/tmp/bios.bin
flashrom -p internal -v /tmp/coreboot.rom
flashrom -p internal -v --ifd -i bios:/tmp/coreboot.rom
flashrom -p internal -v /tmp/coreboot.rom --ifd -i bios:/tmp/bios.bin
Change-Id: I6eba095d478f1a7bdbc3854627a656f93dd9e452
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/85159
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
To make the flashchips "database" easier to manage, split it by vendor
into several smaller files. This commit transfers the bulk of the data
to separate files and includes them from `flashchips.c`. Although this
is ugly (.c includes are usually frowned upon), it is a necessary evil
to make this commit reproducible.
Tested in two ways:
1) Output of `flashrom -L` has no diffs with/without the patch
compared with diff and cmp tools
2) flashrom binary has no diffs with/without the patch
compared with diff and cmp tools
Note for binary comparison documentation and manpages need to be
disabled (documentation is actually modified in the patch), also
version in meson.build set to "none" (otherwise git version counts
every commit).
Change-Id: I3a9ebb0575e2700c5871d16875495d9c8943b30b
Co-developed-by: Angel Pons <th3fanbus@gmail.com>
Co-developed-by: Anastasia Klimchuk <aklm@flashrom.org>
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Signed-off-by: Anastasia Klimchuk <aklm@flashrom.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/83307
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Peter Marheine <pmarheine@chromium.org>
Since the docs are now in the tree, so are the images in docs.
The patch reduces the size of images to be under control: target
1024x768 and within 128Kb whenever possible (which is possible for
almost all of them).
The patch reduces the size of the tarball from ~10M to ~4.5M
Change-Id: I76768d94540f15d929537c73e232b035cf081c7b
Signed-off-by: Anastasia Klimchuk <aklm@flashrom.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/85445
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Comparing structs (romentries in this case) with memcmp
won't work if the struct includes pointers.
Also in this case romentry region is compared to the one loaded
from dump, and from dump only start, end and name are filled in.
https://ticket.coreboot.org/issues/570
Prior effort: https://review.coreboot.org/c/flashrom/+/72433
Change-Id: I715969036c8e516aac8d90b46830f1f92ae6a160
Signed-off-by: Anastasia Klimchuk <aklm@flashrom.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/85292
Reviewed-by: Peter Marheine <pmarheine@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The header only defines getop related stuff so it seems more intuitive
this way.
Change-Id: Iaceeabedc26e93147d8122376d88e730aad1e355
Signed-off-by: Antonio Vázquez Blanco <antoniovazquezblanco@gmail.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/85072
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This needs libcrypto dependency to be present on CI container.
Change-Id: Ib736386a34d184f696a47272957b665c8fe26c06
Signed-off-by: Anastasia Klimchuk <aklm@flashrom.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/85097
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This entry in the flashchips represent a "SFDP-capable chip" and
it doesn't make sense to show the message "WP operation has status
untested, please report this". The entry can cover any generic
SFDP chip and what would you report?
Secondly, the entry "SFDP-capable chip" does not currently support
WP operations anyway.
Going further, we will be working with SFDP way more, so this area
needs to be gradually upgraded.
Testing:
flashrom -p dummy:emulate=MX25L6436 -c "SFDP-capable chip" -r dump.rom
Change-Id: I7e945389895a8042df3aaae72bccf73405be8651
Signed-off-by: Anastasia Klimchuk <aklm@flashrom.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/85075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-by: Matti Finder <matti.finder@gmail.com>
This commit adds uses the new rpmc command implementation to
add them as a new feature to the cli_client.
Also adds the necessary documentation for this new feature.
Tested on the Winbond W25R128JV as a 'SFDP-capable chip'.
This patch was done to add rpmc command support to flashrom.
This enables users to write root keys to their flash chips while they
flash data on the chip. This might become useful in the future as rpmc
support is extended in coreboot.
Also adds debug tools to flashrom, which might be useful in
implementing coreboots rpmc support.
Change-Id: I36c823bbee65f256eb6edabe6f058321c9a0cfa1
Signed-off-by: Matti Finder <matti.finder@gmail.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/84840
Reviewed-by: Peter Marheine <pmarheine@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
Added optional support for all the commands specified in JESD260.
Added a new optional dependency to openssls libcrypto.
Added parsing for the rpmc parameter sfdp table.
Added necessary rpmc parameter information to flashchips struct and the
flash hardening feature to enable rpmc commands.
Enables future use of these commands in the cli_client and also
libflashrom.
Change-Id: I6ab3d0446e9fd674b20550fdbfaf499b8d4a9b38
Signed-off-by: Matti Finder <matti.finder@gmail.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/84934
Reviewed-by: Peter Marheine <pmarheine@chromium.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
I used W25Q256JW as a template and just increased every erase size
calculation.
Datasheet can be found by form contact only via
https://www.winbond.com/hq/product/code-storage-flash-memory/serial-nor-flash/?__locale=en_TW&partNo=W25R512NW
I tested it by running:
dd if=/dev/urandom of=/tmp/random.bin bs=1M count=64
sudo /tmp/flashrom/build/flashrom -p ft2232_spi:type=2232H -w /tmp/random.bin --progress
sudo /tmp/flashrom/build/flashrom -p ft2232_spi:type=2232H -v /tmp/random.bin
And I saw "Verifying flash... VERIFIED."
Change-Id: Ibf670e4014a22e4636789768b759cb51f75cd046
Signed-off-by: Alexandru M Stan <ams@frame.work>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/84752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
This is a simple refactor that aims to simplify maintenance and to
clarify file dependency inside the project.
Currently, most of the declarations reside in programmer.h making it
difficult to really understand file dependency.
Change-Id: I9d819ea1c5bd51289d02189c1dff367ce6d25617
Signed-off-by: Antonio Vázquez Blanco <antoniovazquezblanco@gmail.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/84982
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Miklós Márton <martonmiklosqdev@gmail.com>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
Add detection of Tiger Point chipsets based on SPI controller PCI ID.
Current detection is based on ESPI PCI ID only which limits the
flashrom operability to 2 out of many chipset variants.
TEST=Read flash on a platform with Intel Corporation Tiger Lake-LP
SPI Controller [8086:a0a4] and ISA bridge [0601]: Intel Corporation
Device [8086:a088] ESPI device.
Change-Id: Ie6859d81157760ca03fe34ba5ac311eba5a7c46b
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/84987
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
gitiles are not always available, so the link was not always working,
which could make readers confused.
While we are here, add missing link to Dev Guide.
Change-Id: I9103e5199bdf1b65fa3136aa01259a85e788a251
Signed-off-by: Anastasia Klimchuk <aklm@flashrom.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/84960
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Peter Marheine <pmarheine@chromium.org>
The patch updates calculation of total length for the operation
which is displayed with progress.
The reason is: even if, for example the whole chip erase or write
was requested, the actual length of bytes modified can be less than
whole chip size (areas which already have expected content,
are skipped).
Change-Id: I88ac4d40f1b6ccc1636b1efb690d8d68bdebec08
Co-developed-by: Anastasia Klimchuk <aklm@flashrom.org>
Co-developed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Signed-off-by: Anastasia Klimchuk <aklm@flashrom.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/84439
Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Starting with version 19, clang issues a warning when using `strlen()`
for initializing a static array's size. This causes the build to fail as
the project also sets `-Werror`.
This is fixed by using `sizeof()` instead, which is guaranteed to be
evaluated at compilation time and therefore not triggering the
problematic warning.
Change-Id: If470a65702e9ae08e4303123a0014e53a1fee56e
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/84856
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
The patch adds command line option to handle the following situation:
There is a region which is requested to be erased (or written, because
the write operation uses erase too). Some of the areas inside this
region don't need to be erased, because the bytes already have expected
value. Such areas can be skipped.
The logic selects eraseblocks that can cover the areas which need to be
erased. Suppose there is a region which is partially covered by
eraseblocks of size S (partially because remaining areas don't need to
be erased). Now suppose we can cover the whole region with eraseblock
of larger size, S+1, and erase it all at once. This will run faster:
erase opcode will only be sent once instead of many smaller opcodes.
However, this will run erase over some areas of the chip memory that
didn't need to be erased. Which means, the chip, as a hardware, will
wear faster.
New command line option sets the maximum % memory that is allowed for
redundant erase. Default is 0, S+1 size block only selected if all the
area needs to be erased in full. 50 means that if more than a half of
the area needs to be erased, a S+1 size block can be selected to cover
all area with one block.
The tradeoff is the speed of programming operation VS the longevity of
the chip. Default is longevity.
Change-Id: I154e8a713f626c37dbbe118db700055b96d24803
Co-developed-by: persmule <persmule@hardenedlinux.org
Co-developed-by: Anastasia Klimchuk <aklm@flashrom.org>
Signed-off-by: persmule <persmule@hardenedlinux.org>
Signed-off-by: Anastasia Klimchuk <aklm@flashrom.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/84721
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Peter Marheine <pmarheine@chromium.org>
Original progress reporting implemented in CB:49643 and it has some
issues, for example:
size_t start_address = start;
size_t end_address = len - start;
End address is anything but length minus start address.
update_progress(flash,
FLASHROM_PROGRESS_READ,
/*current*/ start - start_address + to_read,
/*total*/ end_address);
Total should just be length if that's how current value is computed.
---
libflashrom needs to know total size ahead of time.
That's init_progress() and changed update_progress().
It also needs to store the last current value to be able to update it.
That's stage_progress in flashrom_flashctx.
Measuring accurately amount of data which will be read/erased/written
isn't easy because things can be skipped as optimizations. The next
patch in the chain aims to address this, there are TODO/FIXME
comments there.
---
CLI shares terminal with the rest of the code and has to maintain more
state to handle that reasonably well.
Similar to CB:64668, an effort is made to keep the progress on a
single line. Non-progress output is kept track of to know when
moving to a new line cannot be avoided.
---
A script to test the CLI:
\#!/bin/bash
t=${1:-rewW}
shift
if [[ $t =~ r ]]; then
echo ">>> READ"
./flashrom -p dummy:emulate=W25Q128FV,freq=64mhz -r dump.rom --progress "$@"
echo
fi
if [[ $t =~ e ]]; then
echo ">>> ERASE"
./flashrom -p dummy:emulate=W25Q128FV,freq=64mhz -E --progress "$@"
echo
fi
if [[ $t =~ w ]]; then
echo ">>> WRITE (without erase)"
dd if=/dev/zero of=zero.rom bs=1M count=16 2> /dev/null
./flashrom -p dummy:emulate=W25Q128FV,freq=64mhz -w zero.rom --progress "$@"
echo
fi
if [[ $t =~ W ]]; then
echo ">>> WRITE (with erase)"
dd if=/dev/zero of=zero.rom bs=1M count=16 2> /dev/null
dd if=/dev/random of=random.rom bs=1M count=16 2> /dev/null
./flashrom -p dummy:emulate=W25Q128FV,freq=64mhz,image=random.rom -w zero.rom --progress "$@"
echo
fi
Co-developed-by: Anastasia Klimchuk <aklm@flashrom.org>
Co-developed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Change-Id: If1e40fc97f443c4f0c0501cef11cff1f3f84c051
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Signed-off-by: Anastasia Klimchuk <aklm@flashrom.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/84102
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
If hardware protection is requested but not supported by the flash
chip, return an error code indicating that the protection mode is
unsupported, rather than indicating that all WP features are unsupported.
TEST=ninja test
Change-Id: I29e9069c7781fbb238f30aa9a9285b692b0c7200
Signed-off-by: Nikolai Artemiev <nartemiev@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/84826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
This patch updated the VERSION file itself, and the document on
release process.
Change-Id: I2bd2e57e42c29ea5a9d8bc334b86c6fa5c4b46a4
Signed-off-by: Anastasia Klimchuk <aklm@flashrom.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/84811
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Peter Marheine <pmarheine@chromium.org>
Previously the logic which selected large block did deselect of
smaller blocks, but only one level below. So some even smaller blocks
could still remain selected, and this would result in duplicate erase.
This patch deselects all smaller blocks of all levels below, down to
the smallest size. If the area is covered by one large block, no
other smaller blocks inside are needed.
Change-Id: Icfc18d5c090b1dcb92ab157e2c139be71af59300
Spotted-by: persmule <persmule@hardenedlinux.org>
Signed-off-by: Anastasia Klimchuk <aklm@flashrom.org>
Co-authored-by: persmule <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/84686
Reviewed-by: Peter Marheine <pmarheine@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
A larger (not the smallest) erase block used to get erased when half
of sub-blocks it contains need erase, which has at least 2 issues:
1. The rest half of sub-blocks that do not need erase are also erased,
introducing some erase overheads.
2. More severely, since this logic only selects a block and delects
its sub-blocks when half of sub-blocks need erase, but this logic
does not deselect "nested sub-blocks (sub-blocks of sub-block)" not
reach the limit under this block, the logic may cause duplicated
erase. For example, if a erase block (often the largest one
corresponding to the whole chip) has half of its sub-blocks and
some incontiguous nested sub-blocks needing erase, these double
sub-blocks will end up being erased twice, introducing even more
erase overheads than whole-chip erase.
The older behavior of flashrom before adding erasure_layout.c, when no
communicational error occurs, will neither erase blocks that do not
need erase, nor cause duplicated erase. Higher efficiency should be
achieved without introducing extra erase overheads, by allowing
combining contiguous small erase blocks only when they can
coincidently form a larger erase block.
Change-Id: I9e10749186e395da67ec80e296119f33c3f83122
Signed-off-by: persmule <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/84614
Reviewed-by: Peter Marheine <pmarheine@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
